Beckett Water Gardening M400A 用户手册

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

CZ8697 
Rev. D 

 
This pump is carefully inspected and tested to ensure both safety and operating performance. The 
Pump is manufactured for continuous duty usage. Failure to follow these instructions and warnings 
may result in pump damage and/or serious injury. Be sure to save this manual for future reference. 

R

Drip Loop 

 

 

•  Risk of electrical shock, this pump is supplied with a grounding conductor and a grounding type 

attachment plug. To reduce risk of electrical shock, be certain that it is connected only to a properly 
grounded, grounding-type receptacle. 

 

•  To reduce the risk of electric shock, use the pump with the flow control only on portable self-contained 

fountains no larger than 5 feet in any dimension. 

 

•  The National Electric Code requires that a ground fault circuit interrupter (GFCI) be used in the branch 

circuit supplying fountain pumps and other pond equipment. See your electrical supplies dealer for this 
device. 

 

•  Do not remove grounding pin from the plug. 

 

•  Do not connect to any voltage other than that shown on the pump. 

 

•  To reduce risk of electrical shock, always disconnect from power outlet before handling pump or putting 

your hands into the water. 

 

•  Do not let pump run dry. 

 

•  Operate in non-heated fresh water only. Ensure that the pump is completely submerged for proper cooling 

to assure the pump’s life. 

 

•  Do not remove the pump by pulling the power cord. 

 

•  Power cord cannot be replaced; pump should be discarded if any cord damage occurs. 

 

•  Ensure that the electrical cord loops below the electrical outlet to form a “Drip Loop”. This will prevent 

water from running down the cord into the electrical outlet.