Optimus SCP-103 用户手册
9
Using Your Vehicle's Cigarette-Lighter Socket
You can power the SCP-103 from a vehicle’s 12V power
source (such as cigarette-lighter socket) using a 3V, 300-mA
DC adapter and a size H Adaptaplug
source (such as cigarette-lighter socket) using a 3V, 300-mA
DC adapter and a size H Adaptaplug
®
(neither supplied).
Both are available at your local RadioShack store.
Cautions:
You must use a power source that supplies 3V
DC and delivers at least 300 mA. Its center tip
must be set to positive and its plug must fit the
DC and delivers at least 300 mA. Its center tip
must be set to positive and its plug must fit the
SCP-103's
DC 3V
jack. Using an adapter that does not
meet these specifications could damage the SCP-103 or
the adapter.
the adapter.
• Always connect the DC adapter to the SCP-103 before
you connect it to the power source. When you finish, dis-
connect the adapter from the power source before you
disconnect it from the SCP-103.
connect the adapter from the power source before you
disconnect it from the SCP-103.
Follow these steps to power the SCP-103 from your vehicle's
cigarette-lighter socket.
cigarette-lighter socket.
1. Set the adapter's voltage
switch to 3V.
2. Insert the Adaptaplug into the
DC adapter's socket. Line up
positive (+) on the plug with
TIP on the socket.
positive (+) on the plug with
TIP on the socket.
!
14-1255.fm Page 9 Tuesday, July 27, 1999 10:47 AM