Raritan Engineering MCCAT18 用户手册

STEP 3: Launch the Upgrade Utility

The upgrade utility for MCCAT is the same one for Raritanʹs Paragon
products, that is, the ParagonUpdate utility. However, the
ParagonUpdate utility which is implemented with the capability to
upgrade the MCCAT units starts from version 2.4.3. To ensure the success
of the upgrade, it is strongly recommended to use the upgrade utility
downloaded along with the MCCAT firmware when upgrading MCCAT
units.

1. Double click the downloaded upgrade utility ‐‐

ParagonUpdate_XXX.exe, where XXX represents the version number.
The firmware upgrade utility appears.

2. If the MCCAT unit intended to upgrade is already listed in the dialog,

go to Step 3. If not, do the following to specify the device that you
want to upgrade:

a. Click New to start adding the device information.

b. Click the Name field and type the appropriate name for the

MCCAT unit you want to upgrade.

c. Ensure <Default Serial> is selected in the IP address/Serial field

for the serial connection between the MCCAT unit and the
computer you are operating.