Eureka 920 用户手册

When using an electrical appliance, basic precaustions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

• Do not use outdoors or on wet surfaces.

• Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and 

before servicing.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as desribed in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left 

outdoors, or dropped into water, return it to a service center before using.

• Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Do not 

run vacuum cleaner over cord. Keep cord away from heated surfaces.

• Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.

• Do not use extension cords or outlets with inadequate current carrying capacity.

• Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or vacuum cleaner with wet hands or operate without shoes.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that 

may reduce airflow.

• This vacuum cleaner creates suction. Keep hair, loose clothing, fingers, and all parts of body away from openings and 

moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use without dust bag or filter in place.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.

• Store your cleaner indoors in a cool, dry area.

• Keep your work area well lighted.

• Unplug electrical appliances before vacuuming them.

• Unplug before connecting the turbo nozzle. (on some models)