Eureka 4380 用户手册
5
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure on/off switch is in off position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Hose
Step B Attach Handle
CAUTION: Do not catch cord under handle.
Tab
Hose
Adapter
Adapter
#####
3.
From rear of cleaner, align handle with groove and
slide onto cleaner. If necessary, use thumb and
finger pressure to slide handle into position.
slide onto cleaner. If necessary, use thumb and
finger pressure to slide handle into position.
4.
Once handle is in place, check that the hose adapter
tab is completely secure by pulling up on hose.
tab is completely secure by pulling up on hose.
5.
Attach handle with two 5/8 inch screws in the
assembly packet. Use either a slotted or Phillips
assembly packet. Use either a slotted or Phillips
®
head screwdriver.
1.
Locate the tab on the hose adapter of the
extension hose (shortest end).
extension hose (shortest end).
2.
Insert hose adapter into opening on top of unit.
The hose adapter tab must be placed all
the way down into the notch.
The hose adapter tab must be placed all
the way down into the notch.
Groove
Groove
Tab
Ledge
4
1
IMPORTANT:
Hose
MUST BE
inserted
before attaching
the handle.
2
Notch
3
5