Eureka SP5816 用户手册

CAUTION: Assemble the cleaner before using.

Moving parts, make sure on/off switch is

in off (O) position before plugging in.

NOTE: Features may vary by model yet all parts

assemble the same.

HOW TO ASSEMBLE

Attach Handle

CAUTION: Do not catch cord under handle.

1. From rear of cleaner, align handle with groove and slide

onto cleaner. If necessary, use thumb and ﬁ nger pressure

to slide handle into position.

2. Attach handle with the two 1 inch screws provided in the

assembly packet. Use a Phillips

head screwdriver.

NOTE: Hand tighten with screwdriver to be sure

both screws are ﬁ rmly seated.

3. Pick up hose and lay across upper hose retainer.

4. Push the end of the hose in the lower hose retainer to

secure.

Lower Hose Retainer

Hose

Upper Hose

Retainer

Attach Hose

Store Hose and Accessories

Nested Wands

Dusting

Brush

Store Electrical Cord

5. You will ﬁ nd your cord retainer on the handle above the

upper cord hook. Firmly push the electrical cord down

into the cord retainer. This will place the cord out of the

way the next time you vacuum.

6. Next wind the cord around the two cord hooks on the

back side of cleaner.

7. Secure the plug to the cord to prevent unwinding.

Cord

Retainer

Cord Hook

Plug

Cord Hook

Grooves