Eureka 4440-4470 Series 用户手册

How To Replace Bags–Style AA Filteraire

NOTE: Turn off the switch and unplug the

electrical cord before changing dust

bag. Never operate the vacuum cleaner

without the dust bag or the filter.

NOTE: Style AA Filteraire bags must be used

to maintain HEPA grade filtration and

prolong the life of the HEPA filter. Also

use AA Filteraire bags to maintain Micron

grade filtration and prolong the life of the

Micron filter.

NOTE: Models without HEPA or Micron filter

option, may use Style AA bags rather

than Style AA Filteraire.

It may be more convenient to lower the handle to the floor

before changing the bag.

To Replace New Bag:

C. Fold sides of paper bag

below bag collar.

D. Align bag collar hole and

notch with hose adapter.

E. Place bag collar corners

on ledges. Push collar

to rear of compartment.

Check to be sure hose

adapter inserts into bag

collar.

F. Tuck bag into bottom and along sides.
G. Replace front cover. Make sure disposable bag does not

catch under front cover.

Disposable Dust Bag and Filters

The disposable dust bag plays a very important role in

the efficiency of a vacuum cleaner. The purpose of the

paper bag is to trap dirt. As the bag traps dirt, it must also

be porous enough to allow air to pass on through. If the

paper bag becomes clogged, no air can pass through the

cleaner and no cleaning can take place regardless of how

powerful the unit. Change the dust bag and check the

filters frequently. Some fine particles can restrict airflow

very quickly and will decrease performance even before

the bag appears to be full.

When vacuuming carpet fresheners or cleaners, powder,

plaster dust, or similar fine substances, the bag and filters

may require more frequent maintenance.

HOW TO MAINTAIN

(Continued)

A. Remove front cover. Grasp both sides of bag cover near

top. Push thumbs against center of cover and pull out on

sides.

B. Grasp bag collar; pull down slightly and out to remove bag.

* We recommend using only Genuine Eureka Filteraire

Bags, part number 58623.

To Remove Bag:

How to Check and Clear Hose Blockages

Low suction or poor pickup may be due to a blockage in the vacuum cleaner.

1. Remove hose and check suction at end of hose - if little or no suction, check disposable

dust bag. Change if needed. If no improvement proceed to step 2.

NOTE: Turn off the switch and unplug the electrical cord before clearing hose.

2. Remove the handle from the vacuum cleaner by removing the two screws and sliding

the handle towards the rear.

3. Once the handle is removed, disconnect the attachment hose from the unit by lifting

straight up on the hose adapter.

Check for any obstructions that may be in the hose. Any obstructions can be removed by

using a blunt instrument to clear the hose. Flexing the hose may help loosen the clog.

4. Reinstall the hose after clearing the clog. Make sure the hose is inserted into the top of

the vacuum cleaner before reattaching the handle.

NOTE: If no improvement in performance on carpet, proceed to following page.

1. Remove hose and check

suction at end of hose.

Front

Cover