Eureka 5190 用户手册
Motor will not start.
Electric Plug
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Try another outlet.
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
Refer to page 7.
Does not clean the carpet
Filters
Clean or replace the filter(s). Hint: If picking up fine dust, the
or floor.
filter may not look dirty but a fine substance tends to reduce
suction when it blocks the airflow through the filter(s).
suction when it blocks the airflow through the filter(s).
Cyclonic Cassette
Be sure hose adapter inserts into cyclonic cassette.
Be sure the cyclonic cassette is properly seated into the
cassette body. See page 13.
cassette body. See page 13.
Empty cyclonic cassette. Note: There are two chambers
in the cyclonic cassette. The chamber with the screen
will fill much faster than the chamber with the cone. This
is normal, when the chamber with the screen is full, empty
cyclonic cassette, do not wait till the chamber with the cone
is full. See page 13.
in the cyclonic cassette. The chamber with the screen
will fill much faster than the chamber with the cone. This
is normal, when the chamber with the screen is full, empty
cyclonic cassette, do not wait till the chamber with the cone
is full. See page 13.
Belt
Replace a cut, loose or out of shape belt.
Belt Cap
Snap the belt cap inside the hood if it comes loose.
Brush Roll
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Replace brush roll if bristles are worn.
Hose
Remove any clogs from the hose that restrict the airflow.
Check short hose in the base and long hose. Refer to
page 12.
Check short hose in the base and long hose. Refer to
page 12.
No suction at the end of
Hose Adapter
Hose adapter has to seat inside the cyclonic cassette.
the hose.
Hint: Put the hose in place before attaching the handle.
The handle secures the hose.
The handle secures the hose.
Filter(s)
Clean or replace the filter(s). Hint: If picking up fine
dust, the filter may not look dirty, but a fine substance
tends to reduce suction when it blocks the airflow
through the filter(s).
dust, the filter may not look dirty, but a fine substance
tends to reduce suction when it blocks the airflow
through the filter(s).
Hose
Remove any clogs from the hose that restrict the
airflow. Check short hose in the base and long
hose. Refer to page 12.
airflow. Check short hose in the base and long
hose. Refer to page 12.
Headlight not working.
Light Bulb
Replace light bulb.
Noise from the brush roll
Brush Roll
Remove hood and clean debris or items from the brush
area.
roll area.
Belt
Replace a cut, loose or out of shape belt.
Cleaner is hard to push.
Cleaner Height Setting
Put handle in operating position. Tilt the cleaner back
to raise the front wheels off floor. Then turn the knob to
a higher setting.
to raise the front wheels off floor. Then turn the knob to
a higher setting.
Manual Lock
Be sure manual lock is disengaged and free to slide.
Belt
Replace a cut, loose or out of shape belt.
Cleaner height knob will
Cleaner Height
Hint: Put handle in operating position. Tilt the
not turn.
Setting
cleaner back to raise the front wheels off floor.
Then turn the knob.
Then turn the knob.
Dirt Alert red light will not go off.
New carpet fibers.
Over time loose new carpet fibers will diminish and will
not trip the dirt alert sensors.
not trip the dirt alert sensors.
Dirt Alert red light will not
Dirt sensor is not working.
Call 1-800-282-2886 7 a.m. to 8 p.m. Central Standard
come on.
Time, Monday through Saturday for the nearest authorized
Eureka service center.
Eureka service center.
16
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
3
3
3
3
3