Eureka 100-110 用户手册

Assemble the cleaner completely before plugging into an electrical outlet.

Moving parts, stay clear of brush roll when plugging in. Make sure brush roll is clear of moving parts 

when plugging in.

NOTE:  Features may vary by model yet all parts assemble the same.

1.  Remove vacuum body and handle from carton. Locate 

the handle release button on body and the handle tabs 

on handle.

2.  Position  handle  above  vacuum  body.  Line  up  the 

handle tabs to the notches in the opening at the top of 

the vacuum body. 

3.  Press down on the handle release button as shown 

above. Slide the handle down into the unit, until it clicks 

into place.

3

Your vacuum cleaner contains nickel-metal hydride batteries. To protect our environment, prop-

erly dispose of the vacuum when the batteries no longer hold a charge. A municipal waste will not 

dispose of the product with battery intact. Remove the batteries by cutting the connector wires one 

by one before you discard the appliance. Do not dispose of batteries with your regular household 

trash. Remove the batteries and take or send it to your nearest Eureka Warranty Service Station.