Eureka 5740-5799 Series 用户手册

下载
页码 12
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be 
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of fire, electric shock, or injury:
•  Do not use outdoors or on wet surfaces.
•  Do not leave vacuum cleaner when plugged in. Turn off the switch and 
unplug the electrical cord when not in use and before servicing.
•  Do not allow to be used as a toy. Close attention is necessary when used 
by or near children.
•  Use only as described in this manual. Use only manufacturerʼs recommended 
attachments.
•  Do not use with damaged cord or plug. If vacuum cleaner is not working as 
it should, has been dropped, damaged, left outdoors, or dropped into water, 
return it to a service center before using.
•  Do not pull or carry by cord, use cord as a handle, close a door on cord, or 
pull cord around sharp edges or corners. Do not run vacuum cleaner over 
cord. Keep cord away from heated surfaces.
•  Do  not  use  extension  cords  or  outlets  with  inadequate  current  carrying 
capacity.
•  Turn off all controls before unplugging.
•  Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
•  Do not handle plug or vacuum cleaner with wet hands.
•  Do not put any object into openings. Do not use with any opening blocked; 
keep free of dust, lint, hair, and anything that may reduce airflow.
•  This vacuum cleaner creates suction and contains a revolving brush roll. 
Keep hair, loose clothing, fingers, and all parts of body away from openings 
and moving parts.
•  Do not place cleaer on furniture or stairs as the brush roll may cause damage. 
Pleace  cleaner  on  floor  with  the  handle  in  storage  position  while  using 
attachments.
•  Do not pick up anything that is burning or smoking, such as cigarettes, 
matches, or hot ashes.
•  Do not use without dust cup or filter(s) in place.
•  Belt pulleys can become hot during normal use. To prevent burns, avoid 
touching  the belt pulley when servicing the drive belt.
•  Use extra care when cleaning on stairs.
•  Do not use to pick up flammable or combustible liquids such as gasoline, or 
use in areas where they may be present.
•  Store your cleaner indoors in a cool, dry area.
•  Keep your work area well lighted.
•  Unplug electrical appliances before vacuuming them.
•  Unplug before connecting turbo nozzle, model 26.
SAVE THESE INSTRUCTIONS
2
To reduce the risk of electric shock, 
this appliance has a polarized plug (one 
blade is wider than the other). This plug 
will fit in a polarized outlet only one way. 
If the plug does not fit fully into the outlet, 
reverse  the  plug.  If  it  still  does  not  fit, 
contact  a  qualified  electrician  to  install 
the proper outlet. Do not change the plug 
in any way.
GENERAL INFORMATION
Use the cleaner to pick up dirt and dust 
particles. Avoid picking up hard or sharp 
objects that could damage the vacuum 
cleaner.
Service Information
The  instructions  in  this  booklet  serve 
as a guide to routine maintenance. For 
additional service information, telephone 
our  toll  free  number  for  the  nearest 
Eureka Authorized Warranty Station. You 
should know the model, type and serial 
number or date code when you call:
USA: 1-800-282-2886
Mexico:  (55) 5343-4384
Canada: 1-800-282-2886
If you prefer, you can write to Electrolux 
Home  Care  Products  North America, 
Consumer Service, P O Box 3900, Peoria, 
Illinois, 61612, USA. In Canada, write to 
Electrolux Home Care Products Canada, 
866  Langs  Drive,  Cambridge,  Ontario 
N3H 2N7. Refer to The Eureka Warranty 
for complete service information.
 
DO NOT OIL the motor or the 
brush roll. The motor and brush 
roll are permanently sealed and 
lubricated.
Thermal Cut Off
This  vacuum  cleaner  has  a  special 
thermostat  that  protects  the  cleaner  in 
case of motor overheating. If the cleaner 
suddenly  shuts  off,  push  the  on/off 
switch  off  (0)  and  unplug  the  cleaner. 
Check the cleaner for a possible source 
of overheating such as a full dust cup, a 
blocked  hose  or  clogged  filter.  If  these 
conditions are found, fix them and wait at 
least 30 minutes before attempting to use 
the cleaner. After the 30 minute period, 
plug  the  cleaner  back  in  and  push  the 
on/off switch on (l). If the cleaner still does 
not run, then take it to a Eureka Authorized 
Service Center for repair.