Sony XM-D1000P5 规格指南
2003 SONY MOBILE
PRODUCT GUIDE
Design and Specifications subject to change without notice.
1600W max power
500W x 1 RMS into 4W, 20Hz - 300Hz @ 0.2% THD
900W x 1 RMS into 2W, 20Hz - 300Hz @ 0.6% THD
Class D
Variable 50 - 300Hz 12dB/oct Low Pass Filter
40Hz EQ Boost
RCA & Speaker Level Inputs
500W x 1 RMS into 4W, 20Hz - 300Hz @ 0.2% THD
900W x 1 RMS into 2W, 20Hz - 300Hz @ 0.6% THD
Class D
Variable 50 - 300Hz 12dB/oct Low Pass Filter
40Hz EQ Boost
RCA & Speaker Level Inputs
XM-D1000P5
Monaural Power Amplifier
Other Specifications
Circuit system
Class D Technology
Pulse power supply
Pulse power supply
Inputs
RCA pin jacks
High level input connector
High level input connector
Outputs
Speaker terminals
Through out pin jacks
Through out pin jacks
Suitable speaker impedance
2 8W
Maximum outputs
1,000 W (at 4W)
1,600 W (at 2W)
1,600 W (at 2W)
Rated outputs (supply voltage at 14.4 V)
500 W (20 300 Hz, 0.2% THD, at 4W)
900 W (20 300 Hz, 0.6% THD, at 2W)
900 W (20 300 Hz, 0.6% THD, at 2W)
Frequency response
5 300 Hz ( +0.5 dB, -3 dB)
Harmonic distortion
0.06% or less (at 100 Hz, 4W)
Input level adjustment range
0.3 6.0 V (RCA pin jacks)
1.2 12.0 V (High level input)
1.2 12.0 V (High level input)
Low-pass filter
50 300 Hz, 12 dB/oct
Low boost
0 10 dB (40 Hz)
Power requirements
12 V DC car battery (negative ground)
Power supply voltage
10.5 - 16 V
Current drain
at rated output : 90 A (2W)
Remote input : 2 mA
Remote input : 2 mA
Dimensions
Approx. 347 × 57 × 339 mm (w/h/d)
(13 3/4 × 2 1/4 × 13 3/8 in.) (w/h/d) not incl.
projecting parts and controls
(13 3/4 × 2 1/4 × 13 3/8 in.) (w/h/d) not incl.
projecting parts and controls
Mass
Approx. 3.8 kg (8 lb. 6 oz.) not incl. accessories
Supplied accessories
Mounting screws (5)
High level input cord (1)
Protection cap (1)
High level input cord (1)
Protection cap (1)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
500 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.
500 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.