AMX HDMI-UTPRO-0808 用户手册
Overview and General Specifications
19
Instruction Manual – HDMI-UTPRO-0808
Digital Video – HDMI Specifications
* Dolby Digital and DTS support up to 48 kHz, 5.1 channels.
** Two channel L-PCM support up to 192 kHz at 1080p (50 Hz, 59 Hz, 60 Hz).
Two channel L-PCM support up to 96 kHz at 720p, (50 Hz, 59 Hz, 60 Hz), 1080p (24 Hz, 25 Hz, 30 Hz, 50 Hz, 59 Hz,
60 Hz), 1080i (50, 59, 60 fields).
Two channel L-PCM support up to 48 kHz at all resolutions.
** Two channel L-PCM support up to 192 kHz at 1080p (50 Hz, 59 Hz, 60 Hz).
Two channel L-PCM support up to 96 kHz at 720p, (50 Hz, 59 Hz, 60 Hz), 1080p (24 Hz, 25 Hz, 30 Hz, 50 Hz, 59 Hz,
60 Hz), 1080i (50, 59, 60 fields).
Two channel L-PCM support up to 48 kHz at all resolutions.
Digital Video – HDMI Specifications
Compatible Formats
HDMI, HDCP, DVI (DVI is supported with appropriate conversion cable)
Supported Twisted-Pair Cable Types Cat5e, Cat6/6e, Cat6a, Cat7, STP, FTP
Supported Twisted-Pair Cable
Length
Length
• Up to 328 ft. (100 m); cable quality required in order to meet 100 meter
distance should meet ANSI/TIA/EIA 568A-5 specification or better specification
and be rated for 250 MHz or better.
and be rated for 250 MHz or better.
• For cable runs approaching the 100 meter limit, Cat6/6e, Cat6a, or Cat7 is
recommended.
• It is recommended that the cabling between AMX systems/devices be a
uniform run of solid core cabling with no patch cables or extensions.
• If a patch cable is required (e.g., between a patch panel and an AMX device),
the patch cable should be limited to 5 meters total on each end.
• Best results have been seen using a Cat6 coupling device for attaching the
cables together, even when using lower rated Cat5e cabling.
• If running cables together, then screened cabling should be used to reduce
crosstalk.
• If running Cat5e/6 cables together in a bundle, they can only be coupled for a
distance of up to 60 meters before they must be separated over the remainder
of the run. Cat6a and Cat7, which are shielded by definition, can be bundled for
the entire 100 meter run.
of the run. Cat6a and Cat7, which are shielded by definition, can be bundled for
the entire 100 meter run.
Transport Layer Throughput (max.)
10.2 Gbps
Video Data Rate (max.)
4.95 Gbps
Video Pixel Clock (max.)
165 MHz
Progressive Resolution Support
480p, 576p, 720p, 1080p and 640x480 through 1920x1200 @ 60 Hz
(1600x1200 @ 60 Hz and higher requires reduced blanking)
(1600x1200 @ 60 Hz and higher requires reduced blanking)
Interlaced Resolution Support
480i, 576i, 1080i
Audio Format Support
Dolby Digital,* DTS,* L-PCM
Audio Resolution
16 bit to 24 bit
Audio Sample Rate
32 kHz, 44.1 kHz, 48 kHz, 96 kHz,** 192 kHz**
Signal Type Support
HDMI
DVI-D (single link with cable adapter)
DVI-D (single link with cable adapter)
DDC/EDID Support
EDID provided by the HDMI UTPro enclosure
EDID is user re-programmable
EDID is user re-programmable
HDCP Support
Yes, full matrix HDCP support (includes any input to any or all outputs)
AMX HDCP InstaGate
AMX HDCP InstaGate
®
Technology
CEC Support
No
Input Voltage (nominal)
1.0 Vpp differential
Output Voltage (nominal)
1.0 Vpp differential
Output Re-clocking (CDR)
Yes
Output +5 V DDC pin
50 mA max. per output port
HDMI Propagation Delay
3 uS
Connectors
HDMI Type A female