AMX HDMI-UTPRO-0808 用户手册

HDMI UTPro NetLinx Programming

86

Instruction Manual – HDMI-UTPRO-0808

HDMI UTPro SEND_COMMANDs (continued)

?CO<O#>
Returns connection status for 
the HDMI UTPro.

Syntax: 

SEND_COMMAND <DEV>,"'?CO<O#>'"

Variables:
• O# = output port number:

1-8 = Outputs 1-8 - a value of 0 or ALL means all outputs

Example 1:

SEND_COMMAND dvUTPro,"'?C'"

   Returns which inputs are connected for all outputs.
Example 2:

SEND_COMMAND dvUTPro,"'?C1'"

Returns which  input is connected to output 1.
Return string is of the form: 

CO#-II#

Where O# is the queried output port number, and I# is the connected input number 
(zero if disconnected), for example: C4-I2
Would show that output 4 was connected to input 2.

?FWVERSIOND<D#>
Returns the firmware version 
of various HDMI UTPro 
components.

Syntax:

SEND_COMMAND <DEV>,"'?FWVERSIOND<D#>'"

Variables:

D# = hub component description
HUB
MAIN

The  return value is "FWVERSION-<version>" - if the D and component description are 
omitted then the command will return the version number of the HDMI UTPro.

INSTAGATECLEAR
Clears persistence of the 
Sink Key cache on the 
HDMI UTPro.

Syntax:

SEND_COMMAND <DEV>,"'INSTAGATECLEAR'" 

Example:

SEND_COMMAND dvUTPro,"'INSTAGATECLEAR'" 

Clears persistence of Sink Key cache on HDMI UTPro.

INSTAGATEPERSIST
Stores (persists) the current 
Sink Key cache on the HDMI 
UTPro.

Syntax:

SEND_COMMAND <DEV>,"'INSTAGATEPERSIST'" 

Example:

SEND_COMMAND dvUTPro,"'INSTAGATEPERSIST'" 

Stores the current Sink Key cache on HDMI UTPro.

RESET
Performs a soft boot on the 
HDMI UTPro.

Syntax:

SEND_COMMAND <DEV>,"'RESET'"

Example:

SEND_COMMAND dvUTPro,"'RESET'"

Reboots the HDMI UTPro.

InstaGate 
commands