Yamaha AVENTAGE RX-A2020 用户手册

CONFIGURATIONS

➤ Controlling external devices with the remote control

En

By default, the following macro operations are available after 
pressing a macro operation key when the macro operations are 
enabled.

■

You can program up to 10 remote control commands for each 
macro operation key. If you press the corresponding macro 
operation key, the multiple operations will be carried out 
sequentially according to the programmed remote control 
commands.

• Before programming macro operations, you need to register the remote control 

codes (p.136) or assign a function to each key using the learning function (p.138).

• We do not recommend including continuous operations (such as volume 

adjustment) in macro operations.

Perform each of the following steps within 30 seconds.

Otherwise, the setting will be canceled. If this happens, 
repeat from Step 1.

Use the cursor keys (q/w) to select “MACRO” and 
press ENTER.

Use the cursor keys (q/w) to select “EDIT” and 
press ENTER.

Press the macro operation key (RECEIVER z or 
input selection key) to which macro operations are 
assigned and press ENTER.

“MACRO 1” appears in the display window.

To switch the devices (the unit or external device) to control, 
press SOURCE/RECEIVER.

(Example)
Programming for aturning on the unit, bselecting “AV1” as 
the input source, cturning on the DVD player assigned to 
“AV1” and dturning on the TV

a (MACRO 1) Press RECEIVER z.

b (MACRO 2) Press AV1.

c (MACRO 3) Press SOURCE/RECEIVER repeatedly to select 

“AV1” and press SOURCE z.

d (MACRO 4) Press SOURCE/RECEIVER repeatedly to select 

“TV” and press TV z.

If you have programmed 10 functions, “FULL” appears and 
the setting is confirmed automatically.

RECEIVER z

Turns on the unit.

(unregistered)

Input selection keys

Turns on the unit.

Selects the 
corresponding input 
source. (unregistered 
for the [A], [B] and [C] 
keys)

MACRO

EDIT

MACRO1

z  

z 

z