ONKYO TX-SR508 用户手册
17
En
Note
• When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack
will be given a higher priority.
• The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.
With
u (Remote Interactive), you can use the following
special functions:
■
System On/Auto Power On
When you start playback on a component connected via
u, if the AV receiver is on Standby, it will automati-
cally turn on and select that component as the input
source.
When you start playback on a component connected via
u, if the AV receiver is on Standby, it will automati-
cally turn on and select that component as the input
source.
■
Direct Change
When playback is started on a component connected via
u, the AV receiver automatically selects that compo-
nent as the input source.
When playback is started on a component connected via
u, the AV receiver automatically selects that compo-
nent as the input source.
■
Remote Control
You can use the AV receiver’s remote controller to con-
trol your other
You can use the AV receiver’s remote controller to con-
trol your other
u-capable Onkyo components, point-
ing the remote controller at the AV receiver’s remote
control sensor instead of the component. You must enter
the appropriate remote control code first (
control sensor instead of the component. You must enter
the appropriate remote control code first (
Note
• Use only
u cables for u connections. u cables are supplied
with Onkyo players (DVD, CD, etc.).
• Some components have two
u jacks. You can connect either
one to the AV receiver. The other jack is for connecting addi-
tional
u-capable components.
• Connect only Onkyo components to
u jacks. Connecting other
manufacturer’s components may cause a malfunction.
• Some components may not support all
u functions. Refer to
the manuals supplied with your other Onkyo components.
• While Zone 2 is on, the System On/Auto Power On and Direct
Change
u functions do not work.
Using the AUX INPUT jacks on the front panel
Connecting Onkyo
u Components
Camcorder, etc.
Portable audio player
Composite
video output
Analog audio L/R
outputs
outputs
Analog audio line
output (
Step 1:
Make sure that each Onkyo component is connected
with an analog audio cable (connection
Make sure that each Onkyo component is connected
with an analog audio cable (connection
C
in the hookup
examples) (
16).
Step 2:
Make the
u connection (see illustration below).
22).
L
R
IN
BD/DVD
L
R
IN
TV/CD
L
R
REMOTE
CONTROL
ANALOG
AUDIO OUT
L
R
ANALOG
AUDIO OUT
e.g., CD player
e.g., DVD player