ONKYO TX-SR804 用户手册
82
Zone 2
With the Zone 2 function, you can enjoy one input
source in the main room and a different input source in
another room.
There are two ways to hook up your Zone 2 speakers:
1) Use an amp (receiver or integrated amp) in Zone 2 and
connect your Zone 2 speakers to it.
2) Connect your Zone 2 speakers to this AV receiver.
source in the main room and a different input source in
another room.
There are two ways to hook up your Zone 2 speakers:
1) Use an amp (receiver or integrated amp) in Zone 2 and
connect your Zone 2 speakers to it.
2) Connect your Zone 2 speakers to this AV receiver.
Using an Amp in Zone 2
With this hookup, you can enjoy 7.1-channel playback in
the main room and a different stereo source in Zone 2.
The volume for Zone 2 is set on the other amp.
the main room and a different stereo source in Zone 2.
The volume for Zone 2 is set on the other amp.
Hookup
• Use an RCA audio cable to connect the AV receiver’s
• Use an RCA audio cable to connect the AV receiver’s
ZONE 2 LINE OUT L/R jacks to an analog audio
input on the amp in Zone 2.
input on the amp in Zone 2.
• Connect the Zone 2 speakers to the speaker terminals
on the amp in Zone 2.
Using Only Speakers in Zone 2
With this hookup, you can enjoy 5.1-channel playback in
the main room and a different stereo source in Zone 2.
The volume for Zone 2 is set on this AV receiver.
the main room and a different stereo source in Zone 2.
The volume for Zone 2 is set on this AV receiver.
Hookup
• Connect your Zone 2 speakers to the AV receiver’s
• Connect your Zone 2 speakers to the AV receiver’s
ZONE 2 SPEAKERS terminals.
Zone 2 12V Trigger
When Zone 2 is turned on, the ZONE 2 12V TRIGGER
OUT goes high (+12 volts, 100 milliamperes max). Con-
necting this jack to a 12-volt trigger input on a compo-
nent in Zone 2 will turn that component on or off when
Zone 2 is turned on or off on this AV receiver.
OUT goes high (+12 volts, 100 milliamperes max). Con-
necting this jack to a 12-volt trigger input on a compo-
nent in Zone 2 will turn that component on or off when
Zone 2 is turned on or off on this AV receiver.
Connecting Zone 2
R
L
IN
Main room
Zone 2
TV
Receiver/
integrated amp
AV receiver
You don’t need to make any settings to use this hookup.
Proceed to “Using Zone 2” on page 83.
Proceed to “Using Zone 2” on page 83.
L
R
Main room
TV
Zone 2
AV receiver
You must set the “Powered Zone 2” setting to “Act”
(Activated) in order to use this hookup (see page 83).
(Activated) in order to use this hookup (see page 83).