ONKYO 29400095 用户指南

75

This section explains items on the “Source Setup” menu.
Items can be set individually for each input selector.

With IntelliVolume, you can set the input level for each 
input selector individually. This is useful if one of your 
source components is louder or quieter than the others.
Use the Left and Right [

e]/[r] buttons to set the level.

If a component is noticeably louder than the others, use 
the Left [

e] button to reduce its input level. If it’s notice-

ably quieter, use the Right [

r] button to increase its 

input level. The input level can be adjusted from 

−12 dB 

to +12 dB in 1 dB steps.

Note:
IntelliVolume does not apply for Zone 2.

When using your DVD player’s progressive scanning 
function, you may find that the picture and sound are out 
of sync. With the A/V Sync setting, you can correct this
by applying a delay to the audio signal. The delay can be 
set from 0 to 100 milliseconds (msec) in 10 millisecond
steps.
Use the Left and Right [

e]/[r] buttons to set the delay.

To view the TV picture while setting the delay, press 
[ENTER].
To return to the previous screen, press the [RETURN] 
button.

If HDMI Lip Sync is enabled (see page 78), and your TV 
or display supports HDMI Lip Sync, the displayed delay 
time will be the A/V Sync delay time. The HDMI Lip 
Sync delay time is displayed underneath in parentheses.

Note:
A/V Sync is disabled when the Direct listening mode is 
used with an analog input source.

Press the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make sure the 
appropriate external input is selected on your TV.

q]/[w] buttons to 

select “4. Source Setup”, and then press 
[ENTER].
The “Source Setup” menu appears. The name of 
the currently selected input selector is displayed.

q]/[w] buttons to 

e]/[r] buttons to 

change it.
The “Source Setup” menu items are explained 
below.

When you’ve finished, press the [SETUP] 
button.
The setup menu closes.