Rotel RSX-1057 用户手册
31
English
DTS 5.1 discs
DTS 96/24 discs
DTS-ES 6.1 discs
DTS decoding is auto-detected and cannot
be overridden. You may, however, select a
2 channel downmix of 5.1 channel record-
ings or add Rotel XS center back processing
for 5.1 channel discs.
be overridden. You may, however, select a
2 channel downmix of 5.1 channel record-
ings or add Rotel XS center back processing
for 5.1 channel discs.
NOTE
: In addition to the options that follow,
you can press the 2CH button on the remote
to toggle between 2-channel downmix and
multichannel playback.
to toggle between 2-channel downmix and
multichannel playback.
• On a 5.1 system. Press the SUR+ but-
ton on the remote, then press the +/– but-
tons to change between DTS 5.1 channel
or DTS 2.0 channel downmix playback.
tons to change between DTS 5.1 channel
or DTS 2.0 channel downmix playback.
• On a 6.1/7.1 system with a DTS
5.1 disc. Press the SUR+ button on the
remote, then use the +/– buttons to step
through the optional modes: DTS 2.0
channel downmix, DTS 5.1 channel, DTS
with Rotel XS center back processing, DTS
with Pro Logic IIx Music center back pro-
cessing, or DTS with Pro Logic IIx Cinema
center back processing (available only
for 7.1 channel systems). Selecting DTS
5.1 forces the center back channel pro-
cessing off for conventional 5.1 channel
playback. You can also repeatedly press
the DTS Neo:6 button on the front panel
until the desired option is selected.
remote, then use the +/– buttons to step
through the optional modes: DTS 2.0
channel downmix, DTS 5.1 channel, DTS
with Rotel XS center back processing, DTS
with Pro Logic IIx Music center back pro-
cessing, or DTS with Pro Logic IIx Cinema
center back processing (available only
for 7.1 channel systems). Selecting DTS
5.1 forces the center back channel pro-
cessing off for conventional 5.1 channel
playback. You can also repeatedly press
the DTS Neo:6 button on the front panel
until the desired option is selected.
• On a 6.1/7.1 system with a DTS-ES
disc. Press the SUR+ button on the remote,
then use the +/– buttons to step through
three optional modes: DTS 2.0 channel
downmix, DTS 5.1, or DTS-ES 6.1ch/7.1ch
playback. On the front panel, press the DTS
Neo:6 button while playing a DTS source
to step through the same options.
then use the +/– buttons to step through
three optional modes: DTS 2.0 channel
downmix, DTS 5.1, or DTS-ES 6.1ch/7.1ch
playback. On the front panel, press the DTS
Neo:6 button while playing a DTS source
to step through the same options.
• On a 6.1/7.1 system with a DTS
96/24 disc. Press the SUR+ button on
the remote, then use the +/– buttons to
step through the optional modes: DTS 2.0
channel downmix, DTS 96, or DTS 96 with
Rotel XS center back processing. You can
also repeatedly press the DTS Neo:6 but-
ton on the front panel until the desired op-
tion is selected.
the remote, then use the +/– buttons to
step through the optional modes: DTS 2.0
channel downmix, DTS 96, or DTS 96 with
Rotel XS center back processing. You can
also repeatedly press the DTS Neo:6 but-
ton on the front panel until the desired op-
tion is selected.
MPEG Multichannel discs
MPEG decoding is auto-detected and cannot
be overridden. You may, however, select a
2 channel downmix of 5.1 channel record-
ings. If the system is configured with center
back speaker(s), you can also force Rotel XS
processing on or off.
be overridden. You may, however, select a
2 channel downmix of 5.1 channel record-
ings. If the system is configured with center
back speaker(s), you can also force Rotel XS
processing on or off.
NOTE
: In addition to the options that follow,
you can press the 2CH button on the remote
to toggle between 2-channel downmix and
multichannel playback.
to toggle between 2-channel downmix and
multichannel playback.
• On a 5.1 system. Press the SUR+ button
on the remote, then press the +/– buttons
to change between MPEG 5.1 channel or
MPEG 2.0 channel downmix playback.
to change between MPEG 5.1 channel or
MPEG 2.0 channel downmix playback.
• On a 6.1/7.1 system. Press the SUR+
button on the remote, then use the +/– but-
tons to step through the optional modes:
MPEG 2.0 channel downmix, MPEG 5.1
channel, MPEG with Rotel XS center back
processing, MPEG with Pro Logic IIx Mu-
sic center back processing, or MPEG
with Pro Logic IIx Cinema center back
processing (available only for 7.1 chan-
nel systems). Selecting MPEG 5.1 forces
the center back channel processing off for
conventional 5.1 channel playback. You
can also repeatedly press the DSP button
on the front panel until the desired option
is selected.
tons to step through the optional modes:
MPEG 2.0 channel downmix, MPEG 5.1
channel, MPEG with Rotel XS center back
processing, MPEG with Pro Logic IIx Mu-
sic center back processing, or MPEG
with Pro Logic IIx Cinema center back
processing (available only for 7.1 chan-
nel systems). Selecting MPEG 5.1 forces
the center back channel processing off for
conventional 5.1 channel playback. You
can also repeatedly press the DSP button
on the front panel until the desired option
is selected.
Digital Stereo discs
(PCM, MP3, and HDCD)
This group of recordings includes any non-Dolby
Digital 2-channel signal from the RSX-1057’s
digital inputs. You can play these recordings
in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,
7-CH Stereo modes. You can also use Dolby
Pro Logic II matrix surround (5.1 ch systems),
Dolby Pro Logic IIx Music (6.1/7.1 ch sys-
tems), Dolby Pro Logic IIx Cinema (6.1/7.1
ch systems), DTS Neo:6 surround, or one of
the MUSIC 1-4 DSP modes.
Digital 2-channel signal from the RSX-1057’s
digital inputs. You can play these recordings
in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,
7-CH Stereo modes. You can also use Dolby
Pro Logic II matrix surround (5.1 ch systems),
Dolby Pro Logic IIx Music (6.1/7.1 ch sys-
tems), Dolby Pro Logic IIx Cinema (6.1/7.1
ch systems), DTS Neo:6 surround, or one of
the MUSIC 1-4 DSP modes.
All of the bass management settings (speaker
size, subwoofer, and crossover) are in effect
with digital stereo inputs.
size, subwoofer, and crossover) are in effect
with digital stereo inputs.
NOTE
: In addition to the options that follow,
you can select 2-channel, Pro Logic II Cin-
ema (for 5.1 ch systems), Pro Logic II Music
(for 5.1 ch systems), Pro Logic IIx Music (for
6.1/7.1 ch systems), Pro Logic IIx Cinema (for
7.1 ch systems), 5-channel stereo, or 7-chan-
nel stereo by pressing one of the surround
mode buttons on the remote (2CH, PLC, PLM,
5CH, 7CH).
ema (for 5.1 ch systems), Pro Logic II Music
(for 5.1 ch systems), Pro Logic IIx Music (for
6.1/7.1 ch systems), Pro Logic IIx Cinema (for
7.1 ch systems), 5-channel stereo, or 7-chan-
nel stereo by pressing one of the surround
mode buttons on the remote (2CH, PLC, PLM,
5CH, 7CH).
• To select any mode for 2-channel
digital recordings. Press the SUR+ but-
ton on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
ton on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
• To select STEREO mode for 2-chan-
nel digital recordings. Press the 2CH
button on the front panel or remote.
button on the front panel or remote.
• To select Dolby multichannel modes
for 2-channel digital recordings. You
can also step through the Dolby options
(Pro Logic II, Pro Logic IIx, or 3-Stereo)
by repeatedly pressing the DOLBY PLIIx
Mode button on the front panel. You can
select Pro Logic or Pro Logic IIx Cinema
or Music modes by pressing the PLC or
PLM buttons on the remote.
can also step through the Dolby options
(Pro Logic II, Pro Logic IIx, or 3-Stereo)
by repeatedly pressing the DOLBY PLIIx
Mode button on the front panel. You can
select Pro Logic or Pro Logic IIx Cinema
or Music modes by pressing the PLC or
PLM buttons on the remote.
To change the Cinema or Music option
in Pro Logic II mode, press the SUR+ but-
ton the remote twice while in Pro Logic
II or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
ton the remote twice while in Pro Logic
II or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
• To select DTS Neo:6 mode for 2-
channel digital recordings. You can
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
To change the Cinema or Music option
in Neo:6 mode, press the SUR+ button
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
• To select DSP multichannel modes
for 2-channel digital recordings.
You can also step through the DSP options
(MUSIC 1-4, 5CH, 7CH) by repeatedly
pressing the DSP button on the front panel.
Directly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.
You can also step through the DSP options
(MUSIC 1-4, 5CH, 7CH) by repeatedly
pressing the DSP button on the front panel.
Directly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.