Rotel RSX-1057 用户手册

下载
页码 48
40
RSX-1057  Surround Sound Receiver
DTS Neo:6
         DTS Neo:6
      
        MODE:Cinema         
 
     
     
    
 
  
  INPUT SETUP MENU
   
When DTS Neo:6 is selected as the default 
surround mode on the INPUT SETUP menu, 
there are additional option settings and pa-
rameters available to optimize the surround 
decoding for various types of recordings, 
music or movie soundtracks. DTS Neo:6 
uses matrix decoding algorithms to derive a 
center channel and surround channels from 
2-channel source material.
In DTS Neo:6 surround mode, there will only 
be one choice available on the sub-menu: 
selecting CINEMA or MUSIC modes. Use 
the +/– buttons on the remote to change 
the settings.
•  Select CINEMA to optimize the DTS Neo:6 
decoding for movie soundtracks.
•  Select MUSIC to optimize the DTS Neo:6 
decoding for musical recordings.
When you have completed the setting, high-
light the INPUT SETUP MENU line at the bot-
tom of the screen and press the ENTER but-
ton to return to the INPUT SETUP menu (or 
just press the ENTER button).
Configuring 
Speakers and Audio
This section of the setup process covers items 
concerning audio reproduction such as the 
number of speakers, bass management in-
cluding subwoofer crossovers, establishing 
equal output levels for all channels, delay 
settings, and tone contour settings.
Understanding Speaker Con-
figuration
Home theater systems vary in the number of 
speakers and the bass capabilities of those 
speakers. The RSX-1057 offers surround modes 
tailored to systems with various numbers of 
speakers and bass management features which 
send bass information to the speaker(s) best 
able to handle it – subwoofers and/or large 
speakers. For optimum performance, you 
must tell the RSX-1057 the number of speak-
ers in your system and how bass should be 
distributed among them.
NOTE
There are two types of bass in a sur-
round system. The first is bass recorded in 
each of the main channels (front, center, and 
surround). This bass is present in all recordings 
and soundtracks. In addition, Dolby Digital 
5.1 and DTS 5.1 recordings may have a Low 
Frequency Effects (LFE) channel – the .1 chan-
nel. This LFE channel, typically played by a 
subwoofer, is used for effects such as explo-
sions or rumble. The use of the LFE channel will 
vary from soundtrack to soundtrack. Record-
ings that are not encoded in Dolby Digital or 
DTS do not have the LFE channel. 
The following configuration instructions refer 
to LARGE and SMALL speakers, referring more 
to their desired bass configuration than their 
physical size. Specifically, use the LARGE set-
ting for speakers that you want to play deep 
bass signals. Use the SMALL designation for 
speakers that would benefit from having their 
bass sent to more capable speakers. The bass 
management system redirects bass information 
away from all SMALL speakers and sends it to 
the LARGE speakers and/or the SUBWOOFER. 
It may be useful to think of LARGE as “full-range” 
and SMALL as “high-pass filtered.”
Four typical examples of the many possible 
system configurations illustrate the principles 
behind bass management:
•  Five LARGE speakers and sub-
woofer: This system requires no bass 
redirection. All five speakers play the 
normal bass recorded in their respective 
channels. The subwoofer plays only 
the LFE channel bass. Depending on the 
soundtrack, there may be minimal use of 
the LFE channel, so the subwoofer would 
be under utilized. Meanwhile the normal 
bass places higher demands on the ca-
pabilities of the other speakers and the 
amplifiers driving them.
•  LARGE front, center, surround 
speakers, no subwoofer. The nor-
mal bass from the front, center, and sur-
round channels is played in its respective 
speakers. With no subwoofer, the LFE bass 
is redirected to all five LARGE speakers. 
This places significant demands on these 
speakers and their amplifiers, as they must 
play their own normal bass plus the very 
demanding LFE bass. 
•  All SMALL speakers and subwoof-
er. The normal bass from all channels is 
redirected to the subwoofer, which also 
plays the LFE channel. The subwoofer 
handles ALL of the bass in the system. 
This configuration provides several ben-
efits: deep bass is played by the speaker 
most suited to do so, the main speakers 
may play louder with less distortion, and 
the need for amplifier power is reduced. 
This configuration should be used with 
bookshelf-size or smaller main speak-
ers. It should also be considered in some 
cases with floorstanding front speakers. 
This configuration is advantageous when 
driving the system with moderate power 
amplifiers.
•  LARGE front speakers, SMALL cen-
ter and surround speakers, and a 
subwoofer.
 The normal bass from the 
SMALL center and surround speakers is re-
directed to the LARGE front speakers and 
the subwoofer. The LARGE front speakers 
play their own normal bass plus the redi-
rected bass from the SMALL speakers and 
LFE bass. The subwoofer plays the LFE bass 
plus the redirected bass from all of the oth-
er channels. This might be an appropriate 
configuration with a pair of very capable 
front speakers driven by a large power 
amplifier. A potential disadvantage with 
mixed LARGE and SMALL configurations is 
that the bass response may not be as con-
sistent from channel to channel as it might 
be with the all SMALL configuration.
NOTE
As an alternative configuration with 
a satellite/subwoofer package as the front 
speakers, follow the speaker manufacturer’s 
instructions, connecting the high-level inputs 
of the powered subwoofer directly to the front 
speaker outputs of the RSX-1057 and con-
necting the satellites to the subwoofer’s own 
crossover. In this arrangement, the speakers 
would be classified as LARGE and the sub-
woofer setting would be OFF for all surround 
modes. No information is lost during playback 
because the system redirects bass informa-
tion to the front LARGE speakers. While this 
configuration ensures proper satellite speaker 
operation by using the speaker’s own cross-
overs, it has some disadvantages in terms of 
system calibration and would generally not 
be the preferred configuration.