Pioneer VSX-520 用户指南

En

Component video should deliver superior 
picture quality when compared to composite 
video. A further advantage (if your source and 
TV are both compatible) is progressive-scan 
video, which delivers a very stable, flicker-free 
picture. See the manuals that came with your TV 
and source component to check whether they 
are compatible with progressive-scan video.

inputs to the input source you’ve connected. 
This only needs to be done if you didn’t connect 
according to the following defaults: 

•

COMPONENT VIDEO IN 1 – BD

•

COMPONENT VIDEO IN 2 – DVD

See The Input Assign menu on page 40 for 
more on this.

• For the audio connection, refer to 

 on page 22

.

• If you connect any source component to 

the receiver using a component video 
input, you must also have your TV 
connected to this receiver’s 

VIDEO OUT jacks.

The number and kind of connections depends 
on the kind of component you’re connecting.

1

 

Follow the steps below to connect a CD-R, MD, 
DAT, tape recorder or other audio component.

2

BD/DVD player

TV

1 Note that you must connect digital components to analog audio jacks if you want to record to/from digital components (like 

an MD) to/from analog components.

2 If the connection was made using an optical or a coaxial cable, you’ll need to tell the receiver which digital input you connected 

the component to (see Choosing the input signal on page 36).

CD-R, MD, DAT, Tape recorder, etc.

 

2

VSX-520_UCSMXCN_En.book  24 ページ  ２００９年１２月１５日　火曜日　午後２時３３分