Pioneer VSX-D712 用户手册

Playing sources

05

38

En

select the input signal corresponding to 
the source component.
Each press cycles through the options as 
follows:

The 

AUTO setting automatically switches to 

DIGITAL if a digital source is detected, other-
wise the signal select will be 

ANALOG. 

DVD 5.1ch (VSX-D712) and DVD 7.1ch (VSX-
D812) will only appear when 

DVD/LD is 

selected.

When set to 

DIGITAL or AUTO, 2 DIGITAL 

lights when a Dolby Digital signal is input, 
and 

DTS lights when a DTS signal is input. 

• This receiver can only play back Dolby 

Digital, PCM (32kHz–96 kHz) and DTS 
digital signal formats (however, only the 
VSX-D812 can decode DTS 96kHz/24 bit 
signal formats). With other digital signal 
formats, set to 

ANALOG. 

• You may get digital noise when a LD or CD 

player compatible with DTS is playing an 
analog signal. To prevent noise, make the 
proper digital connections (page 16) and 
set the signal input to 

DIGITAL.

• Some DVD players don’t output DTS 

signals. For more details, refer to the 
instruction manual supplied with your 
DVD player.

Listening to multi-channel 
playback

back.
Use the 

MULTI CONTROL buttons (or INPUT 

SELECT).

If the source is Dolby Digital, DTS, or Dolby 
Surround encoded, the proper decoding 
format will automatically be selected and 
shows in the display.

If you are listening to a two channel source, 
each press changes the display as follows:

Refer to page 36 for more details about each 
mode.

(2 Pro Logic II)

(2 Pro Logic II)