Pioneer VSX-D712 用户手册

Setting up the receiver

06

44

En

Chapter 6:

Setting up the receiver

Choosing your receiver setup

To ensure the best possible surround sound, 
be sure to complete the following set up 
operations. This is particularly important 
when using DTS and Dolby surround. You 
only need to make these settings once (unless 
you change the placement of your current 
speaker system or add new speakers, etc.). 
Refer to the following pages for details on 
each of the settings.

• If you are using the Pioneer S-FCRW230/

730 speaker system, make sure the 
Subwoofer setting is set to 

YES and the 

Speaker setting is set to 

FS-CS-SS. You’ll 

also have to change the Crossover 
frequency setting to 

200Hz.

on.
The 

STANDBY indicator goes out.

 or  to choose the option you 

want to adjust.
It will be easiest to adjust each of the settings 
in turn, following the order below (and on the 
following pages). The current setting is shown 
for each option as you cycle through the 
display.

Speaker setting (page 45)
Specify the number and type of speakers 
you have connected.

Surround back speaker setting 
(page 46)
Specify your surround back speaker/
surround back subwoofer setup.

Subwoofer setting (page 46)
Specify how the subwoofer is used.

Crossover frequency setting (page 46)
Determine which frequencies will be sent 
to the subwoofer (or large speakers).

LFE attenuator setting (page 47)
Choose the attenuator level for the LFE 
channel.

Front left speaker distance setting 
(page 47)
Specify the distance from your listening 
position to your front left speaker.

Center speaker distance setting 
(page 47)
Specify the distance from your listening 
position to your center speaker. 

Front right speaker distance setting 
(page 48)
Specify the distance from your listening 
position to your front right speaker.