Sony STR-DH810 用户手册

 

 

 

Press TUNING + to scan from low to 
high; press TUNING – to scan from high 
to low.
The receiver stops scanning whenever a 
station is received.

Turn INPUT SELECTOR to select the FM 
or AM band.

Press TUNING MODE repeatedly to select 
“AUTO”.

Press TUNING + or TUNING –.

If the FM stereo reception is poor and “ST” 
flashes on the display, select monaural audio 
so that the sound will be less distorted.

Press AMP MENU.

Press 

V/v repeatedly to select “<TUNER>”, 

then press 

 

or 

b.

Press 

V/v repeatedly to select  

“FM MODE”, then press 

 

or 

b.

Press 

V/v repeatedly to select “MONO”. 

To return to stereo mode, repeat steps 1 to 4 
and select “STEREO” in step 4. 

You can enter the frequency of a station 
directly by using the numeric buttons.

You can also use INPUT SELECTOR on 
the receiver.

Example 1: FM 102.50 MHz
Select 1 

b 0 b 2 b 5 b 0*

Example 2: AM 1,350 kHz
Select 1 

b 3 b 5 b 0

* Press 0 for models of area code CEL, CEK 

only.

You can also use MEMORY/ENTER on 
the receiver.

If you have tuned in an AM station, adjust the 
direction of the AM loop antenna (aerial) for 
optimum reception.

Make sure you have entered the right 
frequency. If not, repeat steps 2 to 5. If you 
still cannot tune in a station, the frequency is 
not used in your area.