Sony STR-DH710 用户手册
44
GB
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
automatically at a specified time.
1
Press AMP MENU.
2
Press
V/v repeatedly to select
“SYSTEM”, then press
or
b.
3
Press
V/v repeatedly to select
“SLEEP”, then press
or
b.
4
Press
V/v repeatedly to select
the preset time you want, then
press .
press .
The display changes as follows:
OFF
y 0-30-00 y1-00-00 y
1-30-00
y 2-00-00
When sleep timer is being used, “SLEEP”
indicator lights up in the display.
indicator lights up in the display.
Tips
• To check the remaining time before the receiver
turns off, repeat steps 1 to 3. The remaining time
appears on the display.
appears on the display.
• A count down is displayed 1 minute before the
receiver turns off.
Recording
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
using the receiver. Refer to the operating
instructions supplied with your recording
component.
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.
receiver. Refer to the operating instructions
supplied with your CD recorder.
1
Press one of the input buttons
to select the playback
component.
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Prepare the playback
component for playing.
component for playing.
For example, tune to the radio station you
want to record (page 45).
want to record (page 45).
3
Prepare the recording
component.
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
and adjust the recording level.
4
Start recording on the
recording component, then
start playback on the playback
component.
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.
from the SA-CD/CD/CD-R AUDIO OUT jacks.
MENU
O
AMP
MENU
MENU
,
V/v/B/b
Recording onto a CD-R