Sony R-DG1200 用户手册
109
US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\090OTH.fm
STRDG1200CEL\090OTH.fm
masterpage: Right
STR-DG1200
3-289-135-11(1)
Oth
e
r Op
eratio
ns
4
Press
V/v repeatedly to select the Auto
Calibration type, then press
.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
When you select “PHASE INFO.”
You can check the phase of each speaker (in
phase/out of phase).
phase/out of phase).
Press
V/v repeatedly to select a speaker,
then press
to return to step 1 in “To
*
xxx represents a speaker channel.
FL
Front Left
FR
Front Right
CNT
Center
SL
Surround Left
SR
Surround Right
SB
Surround Back
SBL
Surround Back Left
SBR
Surround Back Right
SW
Subwoofer
Tip
Depending on the position of the subwoofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
For details on each sound field type, see
“Enjoying a pre-programmed sound field”
(page 56).
“Enjoying a pre-programmed sound field”
(page 56).
Press 2CH/A.DIRECT, A.F.D.,
MOVIE, or MUSIC repeatedly.
MOVIE, or MUSIC repeatedly.
The selected sound field type appears on the
display window.
display window.
To select the Enhanced
Surround mode
Surround mode
1
Press AMP.
2
Press MENU.
3
Press
V/v repeatedly to select
“<SURROUND>”, then press
or
b.
Auto
Calibration
type
Calibration
type
Explanation
FULL FLAT
Makes the measurement of
frequency from each speaker
flat.
frequency from each speaker
flat.
ENGINEER
Sets the frequency
characteristics to a set that
matches that of the Sony
listening room standard.
characteristics to a set that
matches that of the Sony
listening room standard.
FRONT REF
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
all the speakers to match the
characteristics of the front
speaker.
OFF
Set the Auto Calibration EQ
to off.
to off.
Display
Explanation
xxx* : IN
The speaker is in phase.
xxx* : OUT
The speaker is out of phase. The
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“OUT” appears on the display
window even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“OUT” appears on the display
window even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
xxx* : – – –
No speakers are connected.
Selecting a sound field type
Display
Explanation
continued