Sony R-DG1200 用户手册

D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\090OTH.fm

STR-DG1200

3-289-135-11(1)

When you connect components to both digital 
and analog audio input jacks on the receiver, 
you can fix the audio input mode to either of 
them, or switch from one to the other, 
depending on the type of material you intend 
to watch.

You can also use INPUT SELECTOR on 
the receiver.

The selected audio input mode appears on 
the TV screen.

• AUTO

Gives priority to digital audio signals when 
there are both digital and analog 
connections. If there are more than one 
digital connection, HDMI audio signals have 
priority over COAXIAL and OPTICAL 
audio signals.
If there are no digital audio signals, analog 
audio signals are selected.

• ANALOG

Specifies the analog audio signals input to 
the AUDIO IN (L/R) jacks.

• Some audio input modes may not be set up 

depending on the input.

• When HDMI input, XM, SIRIUS or DMPORT input 

is selected, “------” appears on the display window, 
and you cannot select other audio input modes. 
Select an input other than the HDMI input, XM, 
SIRIUS and DMPORT input, then set the audio input 
mode.

• When “2ch Analog Direct” is being used, or the 

multi channel input is selected, audio input mode is 
set to “ANALOG”. You cannot select other audio 
input modes.