Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

 

 

 

 

 

 

 

 

 

You can customize the settings of the receiver.

Lets you set the receiver switch to standby 
mode automatically when you do not operate 
the receiver or when there is no signals input to 
the receiver.

x OFF

Does not switch to standby mode.

x ON

Switches to standby mode after approximately 
30 minutes.

• This function does not work in the following cases.

– “FM TUNER”, “AM TUNER”, “SIRIUS”, 

“SERVER”, “Rhapsody” or “SHOUTcast” input 
is selected.

– S-AIR receiver or surround amplifier is used.
– “External Control” is set to “ON”.

• If you use the Auto standby mode and the Sleep 

Timer at the same time, the Sleep Timer has 
priority.

You can check the version of the software on 
the system of the receiver, and you can also 
update the software of the receiver.
You can also update the software of the 
receiver using the Setup Manager application 
software provided on the CD-ROM supplied 
with the receiver. For details, see “Updating 
the receiver software using the Setup 
Manager” (page 89).

Press 

V/v repeatedly to select 

“Software Version”, then press 

.

Select “Update via Internet”, then press 

.

The current software version and latest 
software version are displayed on the TV 
screen.

Press 

B/b repeatedly to select 

“Update”, then press 

.

A confirmation screen appears on the TV 
screen.

Press 

B/b repeatedly to select “Start”, 

then press 

.

Receiver updating starts.
The MULTI CHANNEL DECODING 
indicator on the front panel flashes while 
updating.
When the updating complete, the receiver 
will restart automatically.

• In the following cases, a message appears on the 

TV screen and the update of the receiver is not 
performed.
– When all versions are the latest one.
– When the receiver cannot retrieve the data, such 

as when the network has not been set up, or when 
the server is down, etc.

• Do not turn the receiver off or disconnect the 

network cable during software updating. It may 
cause a malfunction.

• It may take 50 minutes for the software updating to 

complete.