Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

You can enjoy your audio/video components connected to the receiver by following the simple 
steps below.

See “1: Installing the speakers” (page 19) and “2: Connecting the speakers” (page 21).

The image quality depends on the connecting jack. See the illustration on the 
right. Select the connection according to the jacks on your components.

t No: See the connection for a TV without an HDMI jack (page 23).
t Yes: See the connection for the TV with HDMI jack (page 23).

t No: See “Connecting components without HDMI jacks” (page 28).
t Yes: See “Connecting components with HDMI jacks” (page 25).

To output multi channel digital audio, check the digital audio output setting on the connected components.
For a Blu-ray Disc player, check that “Audio (HDMI)”, “Dolby Digital (Coaxial/Optical)”, and “DTS (Coaxial/Optical)” 
are set to “Auto”, “Dolby Digital” and “DTS” respectively (as of March 2010).
For a “PlayStation 3”, check that “BD Audio Output Format” is set to “Bitstream” (with system software version 3.15).
For details, refer to the operating instructions supplied with the connected components.

Select the speaker pattern, then perform Auto Calibration. For details, see “Setting the speakers” (page 40) and “Calibrating 
the appropriate speaker settings automatically (Auto Calibration)” (page 42).

You can check the speaker connection using “Test Tone” (page 111). If the sound is not output correctly, check the speaker 
connection and make the settings explained above again.

Y

P

B

/

C

B

P

R

/

C

R