Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

* If you connect the receiver to the ARC 

compatible TV’s HDMI jack via an HDMI cable, 
you do not need to connect the TV to the receiver 
with the optical digital cord.

**If you connect the receiver to the ARC 

compatible TV, the TV sound will output from 
the speakers connected to the receiver via the 
HDMI TV OUT jack. In this case, set “Control 
for HDMI” to “ON” in HDMI Settings menu 
(page 90). If you want to select an audio signal 
using other than an HDMI cable (e.g., via an 
optical digital cord or an audio cord), switch the 
audio input mode using INPUT MODE 

 

(page 103).

Connect the OPTICAL output jack of the TV 
to the TV OPTICAL IN jack of the receiver. If 
your TV is compatible with ARC function, use 
HDMI connection.
Set the sound output jack of the TV to “Fixed” 
if it can be switched between either “Fixed” or 
“Variable”. 

• Be sure to turn on the receiver when the video and 

audio signals of a playback component are being 
output to a TV via the receiver. If the power supply 
of the receiver is not turned on, neither video nor 
audio signals will be transmitted.

• Connect image display components such as a TV 

monitor or a projector to the HDMI TV OUT or 
MONITOR OUT jack on the receiver. You may 
not be able to record, even if you connect recording 
components.

• Depending on the status of the connection between 

the TV and the antenna (aerial), the image on the 
TV screen may be distorted. In this case, place the 
antenna (aerial) farther away from the receiver.

• When connecting optical digital cords, insert the 

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

• All the digital audio jacks are compatible with 

 

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling 
frequencies.

• The receiver has a video conversion function. For 

details, see “Function for conversion of video 
signals” (page 33).