Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

 

The network settings for the receiver must be 
set correctly to use the network functions of 
the receiver.
You can make the required network settings 
for the receiver by following the instructions 
provided by an initial setup wizard.

The procedure used to set up the IP address 
automatically (DHCP) is explained below.
In this case, the router that is connected to the 
receiver or the Internet provider must support 
DHCP.

After “GUI ON” appears on the display 
for a while, the GUI menu appears on the 
TV screen.
Press MENU if the GUI menu does not 
appear on the TV screen.

V/v repeatedly to select 

b.

V/v repeatedly to select 

V/v repeatedly to select 

“Start Network function Setup Wizard” 
appears on the TV screen.

“Success! The receiver is now connected 
to network.” appears on the TV screen 
when you have succeeded in making a 
connection. 
If the failure screen is displayed, perform 
the process referring to “Network Setup” 
(page 118), after you have completed this 
process.

 

The wizard screen appears on the TV screen each 
time you use the network function, until the network 
function setup has been completed.

V/v/b,  

MENU