Sony STR-DN2010 用户手册

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm

STR-DN2010

4-182-049-11(1)

 

 

 

 

 

 

Set the Control for HDMI function of the 
connected component to on. 
If the Control for HDMI function for the 
connected component is already set to on, 
you do not need to change the setting.
For details on setting the TV and connected 
components, refer to the operating 
instructions of the respective components.

• Before you do the “Control for HDMI-Easy 

Setting” from the TV, be sure to turn on the TV, 
connected components and receiver. 

• If the playback components cannot function after 

you have made the settings for “Control for HDMI- 
Easy Setting”, check the Control for HDMI setting 
on your TV. 

• If the connected components do not support 

“Control for HDMI-Easy Setting”, you need to set 
the Control for HDMI function for the connected 
components to on before you perform the “Control 
for HDMI-Easy Setting” from the TV.

• When you assign the component video input to the 

HDMI input using the Input Assign function, you 
cannot set “Control for HDMI” to “ON”.

 

By a simple operation (one-touch), 
components connected to the receiver with 
HDMI connections start automatically. You 
can enjoy the sound/image using connected 
components.
When you set “Pass Through” to “AUTO” or 
“ON”, sound and image can be output only 
from the TV while the receiver remains in 
standby mode.

When you start playback a connected 
component, the receiver and TV operation are 
simplified as follow:

• Depending on the TV, the start of the content may 

not be output.

• Depending on the settings, the receiver may not 

turns on when “Pass Through” is set to “AUTO” or 
“ON”.

You can also select a connected component, such as 
DVD/Blu-ray Disc player using the TV menu. The 
receiver and TV will automatically switch to the 
appropriate HDMI input.

Turns on (if in standby mode)

Switches to appropriate HDMI input