Sony STR-DH500 用户手册
52
US
Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
changes cyclically as follows.
changes cyclically as follows.
All inputs except the FM and AM
band
band
Index name of the input*
t Selected input t
Sound field currently applied
FM and AM band
Preset station name*
t Frequency t
Sound field currently applied
* Index name appears only when you have assigned
one to the input or preset station (page 26, 48).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Note
Character or marks may not be displayed for some
languages.
languages.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
power is on.
Each time you press SLEEP, the display
changes cyclically as follows:
changes cyclically as follows:
2-00-00
t
1-30-00
t 1-00-00 t 0-30-00
t OFF
When sleep timer is being used, “SLEEP”
lights up in the display.
lights up in the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.