Sony STR-DV10 手册

下载
页码 56
Gettin
g
 Star
ted
masterpage:Right
lename[E:\SEM_Janet\Revision1_STR-
DV10\J9050000_2560573121_US\2560573121\US03CON_STR-DV10-U.fm]
 model name1[STR-DV10]
[2-560-573-12(1)]
21
US
x
 XXXX/XX
(Surround speaker position)*
Lets you specify the location of your surround speakers 
for proper implementation of the surround effects in 
the Cinema Studio EX modes (page 31).
• SIDE/LO
Select if the location of your surround speakers 
corresponds to section A and C.
• SIDE/HI
Select if the location of your surround speakers 
corresponds to section A and D.
• BEHD/LO
Select if the location of your surround speakers 
corresponds to section B and C.
• BEHD/HI
Select if the location of your surround speakers 
corresponds to section B and D.
* This setup item is not available when the surround 
speakers size parameter is set to “NO”.
Tip
Surround speaker position is designed specifically for 
implementation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so 
critical. Those sound fields were designed under the 
premise that the surround speakers would be located 
behind the listening position, but presentation remains 
fairly consistent even with the surround speakers 
positioned at a rather wide angle. However, if the 
speakers are pointing toward the listener from the 
immediate left and right of the listening position, the 
surround effects becomes unclear unless set to 
“SIDE/LO” or “SIDE/HI”. 
Nevertheless, each listening environment has many 
variables, such as wall reflections, and you may obtain 
better results using “BEHD/HI” if your speakers are 
located high above the listening position, even if they 
are to the immediate left and right.
Therefore, although it may result in a setting contrary 
to the above explanation, we recommend that you 
playback multi channel surround encoded software and 
select the setting that provides a good sense of 
spaciousness and that best succeeds in forming a 
cohesive space between the surround sound from the 
surround speakers and the sound of the front speakers. 
If you are not sure which sounds best, select 
“BEHD/LO” or “BEHD/HI” and then use the speaker 
distance parameter and speaker level adjustments to 
obtain proper balance.
SP > XXX Hz
(Speaker crossover frequency)*
Initial setting: 100 Hz
Lets you adjust the bass crossover frequency of 
speakers in SET UP menu. You can adjust the bass 
crossover frequency from 40 Hz to 160 Hz in 9 steps.
* This setup item is only available when at least one 
speaker is set to “SMALL” and the corresponding 
speaker segment flashes in the display.
SL
SR
B
B
A
A
100˚
120˚
60
30
C
D
C
D
US01COV_STR-DV10-U.book  Page 21  Monday, July 4, 2005  11:52 AM