Sony STR-DN840 用户手册
10
US
Description and location of parts
The indicator above the button lights
up as follows:
Green: The receiver is turned on.
Amber: The receiver is in standby
mode, and
– Either “Control for HDMI”
up as follows:
Green: The receiver is turned on.
Amber: The receiver is in standby
mode, and
– Either “Control for HDMI”
– “Pass Through” (page 94) is set to
“On” or “Auto”.
Lights off when the receiver is in
standby mode and “Control for
HDMI”, “Pass Through”, “Network
Standby”, and “BT Standby” are set to
“Off”.
standby mode and “Control for
HDMI”, “Pass Through”, “Network
Standby”, and “BT Standby” are set to
“Off”.
If the indicator flashes slowly, the software
update is in progress (page 71). If the
indicator flashes in quick succession, the
software update has error (page 106).
update is in progress (page 71). If the
indicator flashes in quick succession, the
software update has error (page 106).
B SPEAKERS (page 35)
C TUNING MODE, TUNING +/–
C TUNING MODE, TUNING +/–
Press TUNING MODE to operate a
tuner (FM/AM).
tuner (FM/AM).
Press TUNING +/– to scan a station.
D A.F.D./2CH, MOVIE, MUSIC
(page 51, 53)
Operates the Bluetooth function.
H DIMMER
Adjusts the brightness of the display
panel in 3 levels.
panel in 3 levels.
I DISPLAY (page 102)
J Remote control sensor
J Remote control sensor
Receives signals from remote control.
K PURE DIRECT (page 55)
The indicator above the button lights
up when PURE DIRECT is activated.
up when PURE DIRECT is activated.
(USB) port (page 29)
O AUTO CAL MIC jack (page 34)
P PHONES jack
P PHONES jack
Connects to headphones.
Front panel
Note