Sony STR-DA7100ES 用户手册
82
GB
Custom install mode
This receiver features the custom install modes
described below. Depending on how you
intend to use these features, use of these modes
may require additional equipment (available
separately) or modification of your listening
environment. Please consult the retailer where
you purchased this receiver for more
information.
described below. Depending on how you
intend to use these features, use of these modes
may require additional equipment (available
separately) or modification of your listening
environment. Please consult the retailer where
you purchased this receiver for more
information.
1
Press MAIN MENU repeatedly
to select “CIS,” then press the
control key.
to select “CIS,” then press the
control key.
You can also use MAIN MENU on the
receiver.
receiver.
2
Move the control key
V/v to
select the menu item.
You can also use MENU on the receiver.
For details, see “CIS menu item and
parameters.”
For details, see “CIS menu item and
parameters.”
3
Move the control key
B/b to
select the parameter you want.
You can also use +/– on the receiver.
4
Repeat steps 2 and 3 to adjust
other items.
other items.
CIS menu item and parameters
Initial settings are underlined.
x 2ND ZONE (2nd zone source)
x 3RD ZONE (3rd zone source)
Lets you select the source signals (analog
audio and video signals for 2nd zone; only
analog audio signals for 3rd zone) you want to
output in the 2nd zone or 3rd zone (except
PHONO, MULTI CHANNEL INPUT, i.LINK
and HDMI). When you select “SOURCE,” the
signals of the current input are output.
audio and video signals for 2nd zone; only
analog audio signals for 3rd zone) you want to
output in the 2nd zone or 3rd zone (except
PHONO, MULTI CHANNEL INPUT, i.LINK
and HDMI). When you select “SOURCE,” the
signals of the current input are output.
Notes
• Connect video signals to 2ND ZONE using the
VIDEO jack.
• Connect audio signals to 2ND ZONE or 3RD
ZONE using the AUDIO L/R jack.
Tips
• Only signals from components connected to the
analog input jacks are output through the 2ND
ZONE or 3RD ZONE jacks. No signal is output
from components connected to only the digital
input jacks.
ZONE or 3RD ZONE jacks. No signal is output
from components connected to only the digital
input jacks.
• When “SOURCE” is selected, the signals input to
the MULTI CHANNEL INPUT jacks are not
output from the 2ND ZONE or 3RD ZONE jacks
even when the MULTI CH IN function is used. The
2 channel analog audio signals of the current input
are output.
output from the 2ND ZONE or 3RD ZONE jacks
even when the MULTI CH IN function is used. The
2 channel analog audio signals of the current input
are output.
x INSTALLER MODE (RS232C
control)
• ON
The receiver can receive commands from the
RS232C port even when the power is off
(standby mode).
RS232C port even when the power is off
(standby mode).
• OFF
The receiver does not receive commands
from the RS232C port when the power is off
(standby mode).
from the RS232C port when the power is off
(standby mode).
x 12V TRIG. MAIN (12 V trigger for
the main receiver)
x 12V TRIG. 2ND (12 V trigger for
the 2nd zone)
1,2,
3
3
1