Sony STR-DG1100 用户手册

Depending on the characteristics of the sub woofer 
you are using, the setup distance value may be 
further away from the actual position.

You can use the auto calibration function when 
you use the receiver as a pre-amplifier.
In this case, the distance value shown on the 
display may differ from the actual distance 
value. However, there will be no problems 
even if you continue to use the receiver with 
that value.

The auto calibration function allows you to 
measure the following:
• Speaker connections

a)

• Polarity of speakers
• Speaker distance

b)

• Speaker size

b)

• Speaker level
• Frequency characteristics

c)

a) This receiver corrects signals by analog 

downmix processing only for the center speaker 
and sub woofer when the multi-channel input is 
selected. The correction is invalid for other 
speakers.

b) The measurement result is not utilized when the 

multi-channel input is selected.

c) • DTS 96/24 signals are always played back as 

48 kHz when you correct signals.

• The measurement result is not utilized in the 

following cases.
–The multi-channel input is selected.
–“2ch Analog Direct” is being used.
–Input signals of which the sampling frequency 

is more than 96 kHz are being received.

If it is not lit, or “GUI MODE” is not 
displayed in the display window of the 
receiver, follow the steps given in “7: 
Operating the receiver using the GUI 
(Graphical User Interface)” (page 37).

V/v repeatedly to select 

b.

The Settings menu list appears on the TV 
screen.

V/v repeatedly to select 

b.

V/v repeatedly to select 

V/v repeatedly and 

• Speaker Distance
• Speaker Level