Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

• TV+AMP: The sound is output from TV’s 

speaker and the speakers connected to the 
receiver.

• The sound quality of the playback equipment 

depends on the TV’s sound quality, such as the 
number of channels, and the sampling 
frequency, etc. If the TV has stereo speakers, the 
sound output from the receiver is also in stereo as 
that of the TV, even if you play back multi 
channel source.

• When you connect the receiver to a video 

equipment (projector, etc.), sound may not be 
output from the receiver. In this case, select 
“AMP”.

x Zone2 / OutB

Lets you set the output zone for the HDMI 
OUT B (ZONE 2) jack.
• Zone2: The selected input is output in zone 

2. You can select another input for the 
HDMI OUT A jack in the main zone.

• OutB: The selected input is output from 

both HDMI OUT B (ZONE 2) jack and 
HDMI OUT A jack in the main zone.

• If you set to “Zone2” and select the same input for 

both main zone and zone 2, there may be some 
interference on the audio and video signals in the 
main zone. In this case, set “Priority” to “Main 
Only”.

• When HDMI “Zone2 / OutB” setting menu is 

“Zone2”, Control for HDMI will be disabled and 
Control for HDMI setting menu will be dark out. 
To use “Ctrl for HDMI”, you need to change 
“Zone2 / OutB” setting to “OutB”.

x Priority

Lets you set the priority when you select the 
same input for both main zone and zone 2.
• Main & Zone2: You can enjoy the same 

input in the main zone and zone 2. However, 
there may be some interference on the audio 
and video signals in the main zone.

• Main Only: You can enjoy good audio and 

video quality in the main zone. There is no 
output in zone 2.

This function is not available when “Zone2 / OutB” 
is set to “OutB”.

x Fast View

Lets you set the operation of Fast View.
• Auto: You can select HDMI input faster 

than the normal selection.

• Off: Fast View and preview for HDMI 

functions are not available.

This function is not available when “Zone2 / OutB” 
is set to “Zone2”.

You can adjust the settings for the network. 
The Network Settings menu is available only 
when the Home Network or SEN function is 
selected.

x Settings

Lets you make the network settings. For 
details, see “Configuring the network settings 
of the receiver” (page 48).
• Wireless LAN Settings
• Wired LAN Settings

x Information

Lets you check the network information for 
the network.

Select “Information”, then press 

.

Select the setting item you want to 
check, then press 

.

The current setting information appears on 
the TV screen.
You can check the settings* for 
“Connection”, “SSID”, “Security Setup”, 
“IP Settings”, “IP Address”, “Subnet 
Mask”, “Default Gateway”, “DNS 
Settings”, “Primary DNS”, “Secondary 
DNS”, “Proxy Settings”, “Proxy Address”, 
“Port Number” and “MAC Address”.

* The setting items during setup differ depending 

on the network environment and connection 
type.