Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

 

 

 

 

 

 

• To be able to use the Bluetooth function, the 

Bluetooth device to be connected requires the same 
profile as the receiver’s.

 

Note also that even if the same profile exists, 
devices may vary in function depending on their 
specifications.

• Due to the characteristic of Bluetooth wireless 

technology, the sound played on this receiver is 
slightly delayed from the sound played on the 
Bluetooth device during listening to the music.

Bluetooth device

You can play music of a Bluetooth device via 
this receiver after pair and connect the 
Bluetooth device with the receiver.

Check the websites for the latest information 
about compatible Bluetooth devices with 
URLs listed under “About support 
information” (page 132).

Pairing is an operation where Bluetooth 
devices register with each other beforehand. 
Use the procedure below to pair the receiver 
with your Bluetooth device. Once a pairing 
operation is performed, it does not need to be 
performed again. If pairing is already 
completed, proceed to “Playing music of a 
Bluetooth device” (page 86).

Place the Bluetooth device 
within 1 meter (3.3 feet) from 
this receiver.

Press BLUETOOTH to select 
Bluetooth function.

“Pairing ready” appears on the TV screen 
and “BLUETOOTH” flashes quickly on 
the display panel. Perform step 4 within 5 
minutes, otherwise pairing will be 
canceled. In this case, repeat this step.

Perform pairing on the 
Bluetooth device to detect this 
receiver.

For details, refer to the operating 
instructions of your Bluetooth device.
A list of detected devices may appears on 
the Bluetooth device display depending 
on the type of Bluetooth device. This 
receiver is displayed as 

 

“STR-DA1800ES”.

Pairing the receiver with a 
Bluetooth device

BLUETOOTH