Sony STR-DA1800ES 用户手册

D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF 
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm

STR-DA1800ES
4-428-194-12(2)

 

 

 

 

 

 

 

 

 

You can adjust each speaker manually.
You can also adjust the speaker levels after the 
Auto Calibration is completed. See “Using 
AUTO CALIBRATION” (page 44).

The speaker settings are only for the current seating 
position. 

x SP Pattern (Speaker Pattern)

Select “SP Pattern” according to the speaker 
system which you are using. Select the speaker 
pattern before you perform Auto Calibration.

x SB Assign (Surround back 

Lets you set the SPEAKERS SURROUND 
BACK/FRONT HIGH/BI-AMP/FRONT B 
terminals for a bi-amplifier or speakers front B 
connection.
• Speaker B
• BI-AMP
• OFF

When you change the connection from a bi-
amplifier or speakers front B to surround back or 
front high speakers connection, set the “SB Assign” 
to “OFF”, then set up the speakers again. See “Using 
AUTO CALIBRATION” (page 44) or “Manual 
Setup” (page 99). 

x Manual Setup

Lets you adjust each speaker manually on the 
“Manual Setup” screen. You can also adjust 
the speaker levels after the Auto Calibration is 
completed.

You can adjust each speaker’s level (front left/
right, front left/right high, center, surround 
left/right, surround back left/right, 
subwoofer).

Select the speaker on the screen for 
which you want to adjust the level, then 
press .

Select “Lvl”, then press 

.

You can adjust the level from –10.0 dB to 
+10.0 dB in 0.5 dB intervals.

When one of the sound fields for music is selected, 
no sound is output from the subwoofer if all the 
speakers are set to “Large” in the Speaker Settings 
menu. However, the sound will be output from the 
subwoofer if
– the digital input signal contains LFE signals.
– the front or surround speakers are set to “Small”.
– “MULTI ST.”, “PLII MV”, “PLII MS”, 

 

“PLIIx MV”, “PLIIx MS”, “PLIIz”, “HD-D.C.S.” 
or “P. AUDIO” is selected.

You can adjust the distance from the seating 
position to each speaker (front left/right, front 
left/right high, center, surround left/right, 
surround back left/right, subwoofer).

Select the speaker on the screen for 
which you want to adjust the distance 
from the seating position, then press 

.

Select “Dist”, then press 

.

You can adjust the distance from 1 m 0 cm 
to 10 m 0 cm (3 feet 3 inches to 32 feet 

 

9 inches) in 10 cm (1 inch) intervals.

• Depending on the speaker pattern setting, some 

parameters may not be available.

• This function does not work when “A. DIRECT” is 

being used.

You can adjust the distance in 1 cm interval when 
you have performed the Auto Calibration and saved 
the measurement result.