Sony STRDG800 用户手册

F:\Sony SEM 
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US03CON_STR-DG800-
CEL.fm

STR-DG800

2-662-258-12 (1)

Connect the AC power cord to a wall outlet.

• Install this system so that the power cord can be 

unplugged from the wall socket immediately in the 
event of trouble.

• The AC OUTLET(s) on the rear of the receiver is a 

switched outlet, which supplies power to the 
connected component only while the receiver is 
turned on.

• Make sure that the total power consumption of the 

component(s) connected to the receiver’s AC 
OUTLET(s) does not exceed the wattage stated on 
the rear panel. Do not connect high-wattage 
electrical home appliances such as electric irons, 
fans, or TVs to this outlet. This may cause a 
malfunction.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure. This procedure can also 
be used to return settings you have made to 
their factory defaults. 
Be sure to use the buttons on the receiver for 
this operation.

Press ?/1 to turn off the 
receiver.

Hold down ?/1 for 5 seconds.

“PUSH ENTER” appears on the display.

After “MEMORY CLEARING” appears 
on the display for a while, “MEMORY 
CLEARED” appears.
The following items are reset to their 
factory settings.
• All settings in the LEVEL, EQ, SUR, 

TUNER, AUDIO, VIDEO, SYSTEM 
and AUTO CAL menus.

• The sound field memorized for each 

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset 

stations.

• MASTER VOLUME is set to 

“VOLUME MIN”.

• Input is set to “DVD”.

FRONT B

FRONT A

OUND

AC power cord 

To the wall outlet

AC OUTLET

?/1

US01COV_STR-DG800-CEL.book  Page 33  Tuesday, March 14, 2006  3:53 PM