Sony STRDG800 用户手册

下载
页码 100
59
US
F:\Sony SEM 
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Right
STR-DG800
2-667-346-12 (1)
Ampl
ifier O
p
erati
o
n
s
SB L DIST. (Surround back left 
speaker distance)
b)
Lets you set the distance from your listening 
position to the surround back left speaker. 
Surround back left speaker distance should be 
set from a distance equal to the front speaker 
distance (A) to a distance 15 feet closer to 
your listening position (E).
SB R DIST. (Surround back right 
speaker distance)
b)
Lets you set the distance from your listening 
position to the surround back right speaker. 
Surround back right speaker distance should 
be set from a distance equal to the front 
speaker distance (A) to a distance 15 feet 
closer to your listening position (F).
a)
When the surround back speakers are set to “SB 
SP SINGLE”.
b)
When the surround back speakers are set to “SB 
SP DUAL”.
Tip
The receiver lets you to input the speaker position in 
terms of distance. However, it is not possible to set 
the center speaker further than the front speakers. 
Also, the center speaker cannot be set more than
 
5 feet closer from the front speakers.
Likewise, the surround speakers and the surround 
back speaker can not be set further away from the 
listening position than the front speakers. And they 
can be no more than 15 feet closer. This is because 
incorrect speaker placement is not conducive to the 
enjoyment of surround sound.
Please note that, setting the speaker distance closer 
than the actual location of the speakers will cause a 
delay in the output of the sound from that speaker. In 
other words, the speaker will sound like it is further 
away.
For example, setting the center speaker distance
 
3-6 feet closer than the actual speaker position will 
create a fairly realistic sensation of being “inside” 
the screen. If you cannot obtain a satisfactory 
surround effect because the surround speakers are 
too close, setting the surround speaker distance 
closer (shorter) than the actual distance will create a 
larger sound stage.
Adjusting these parameter while listening to the 
sound often results in much better surround sound. 
Give it a try!
SUR PLACEMENT 
 
(Surround speaker position)
Lets you specify the location of your surround 
speakers for proper implementation of the 
surround effects in the Cinema Studio EX 
modes (page 64). This setup item is not 
available when the surround speakers are set to 
“NO” (page 49).
• PL.  SIDE/LOW
Select if the location of your surround 
speakers corresponds to sections A and C.
• PL.  SIDE/HIGH
Select if the location of your surround 
speakers corresponds to sections A and D.
• PL.  BEHD/LOW
Select if the location of your surround 
speakers corresponds to sections B and C.
• PL.  BEHD/HIGH
Select if the location of your surround 
speakers corresponds to sections B and D.
continued
US01COV_STR-DG800-CEL.book  Page 59  Tuesday, March 14, 2006  3:53 PM