Sony STRDG800 用户手册

F:\Sony SEM 
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm

STR-DG800

2-667-346-12 (1)

You can also press the numeric buttons to 
select the preset channel you want. Then 
press ENTER to enter the selection. You 
can also press TUNING MODE on the 
receiver to select “PRESET TUNING”, 
and then turn TUNING +/– on the 
receiver.
You can select preset channels from 1 to 
30.

The preset channel information will be updated 
depending on the service provided by the XM 
Satellite Radio Inc. that you have subscribed to.

ANTENNA

The XM antenna is not connected 
or transmission is not being 
received properly.

Make sure that the antenna is securely connected.
Try to disconnect the antenna then reconnect, or 
turn off the power then turn back on.

UPDATING

The encryption code is being 
updated.

Wait until the encryption code has been updated.

NO SIGNAL

The signal is too weak.

Make sure that the antenna is securely connected.
Adjust the antenna so that the signal is as strong as 
possible.

LOADING

The audio channel or information 
is being acquired.

Wait until the audio channel or information has been 
acquired.

OFF AIR

The selected channel is off the air.

Make sure that you selected the channel properly.
Try to select another channel.

––––

There is no characteristic 
information such as an artist name, 
song title or program title 
available.

—

––

The preset number entered is 
invalid number.

Enter a number from 1 to 30.

XM –––CH

The selected channel is not 
available.

—

US01COV_STR-DG800-CEL.book  Page 77  Tuesday, March 14, 2006  3:53 PM