Sony STRDG800 用户手册
83
US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Right
STR-DG800
2-667-346-12 (1)
Other Oper
ations
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
power is on.
Each time you press the button, the display
changes cyclically as follows:
changes cyclically as follows:
2-00-00
t
1-30-00
t 1-00-00 t 0-30-00
t OFF
When Sleep Timer is being used, “SLEEP”
lights up on the display.
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
Recording using the
receiver
receiver
You can record onto a MiniDisc or audio tape
using the receiver. See the operating
instructions supplied with your MD deck or
tape deck.
using the receiver. See the operating
instructions supplied with your MD deck or
tape deck.
1
Press one of the input buttons
to select the playback
component.
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Prepare the playback
component for playing.
component for playing.
For example, insert a CD into the CD
player.
player.
3
Prepare the recording
component.
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
recording deck and adjust the recording
level.
4
Start recording on the
recording component, then
start playback on the playback
component.
recording component, then
start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The audio signals input to the MULTI CH IN jacks
are not output from the analog AUDIO OUT jacks
even when MULTI CH IN is selected. The analog
audio signals of the current or previously used
input are output.
even when MULTI CH IN is selected. The analog
audio signals of the current or previously used
input are output.
Recording onto a MiniDisc or
audio tape
audio tape
continued
US01COV_STR-DG800-CEL.book Page 83 Tuesday, March 14, 2006 3:53 PM