Sony STR-DA3200ES 用户手册

Depending on the characteristics of the sub woofer 
you are using, the setup distance value may be 
further away from the actual position.

You can use the auto calibration function when 
you use the receiver as a pre-amplifier.
In this case, the distance value shown on the 
display may differ from the actual distance 
value. However, there will be no problems 
even if you continue to use the receiver with 
that value.

The auto calibration function allows you to 
measure the following:
• Whether or not speakers are connected

a)

• Terminal types of speakers connected
• Distance of each speaker from your listening 

position

b)

• Speaker size

b)

• Speaker level
• Frequency characteristics

c)

a)

This receiver corrects signals by analog downmix 
processing only for the center speaker and sub 
woofer when MULTI IN is selected. The 
correction is invalid for other speakers.

b)

The measurement result is not utilized when 
MULTI IN is selected.

c)

• DTS 96/24 signals are always played back as 48 

kHz when you correct signals.

• The measurement result is not utilized in the 

following cases.
– MULTI IN is selected.
– Input signals of which the sampling frequency 

is more than 96 kHz are being received.

Switch the input of the TV so that the 
setting menu is displayed on the TV 
screen connected to this receiver.

Receiver operation is enabled.

The list of setting menus appears.

V/v repeatedly to select