Sony STR-DA3200ES 用户手册
80
GB
Adjusting the speaker
levels and balance
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening the test tone from your
listening position.
while listening the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
centered at 800 Hz.
1
Turn on the receiver and TV.
2
Press ON SCREEN.
Switch the input of the TV so that the
setting menu is displayed on the TV
screen connected to this receiver.
setting menu is displayed on the TV
screen connected to this receiver.
3
Press RECEIVER.
Receiver operation is enabled.
4
Press MENU.
The list of setting menus appears.
5
Press
V/v repeatedly to select
“Level Settings,” then press
to enter.
6
Press
V/v repeatedly to select
“TEST TONE,” then press
.
7
Press
V.
The test tone is output from each speaker
in sequence.
Also, if you press
in sequence.
Also, if you press
v
, the pattern will
become the “FIX” pattern in which the
test tone is output from the selected
speaker only.
test tone is output from the selected
speaker only.
8
Press
to enter.
9
Adjust the speaker level and
balance using the Level
Settings menu so that the level
of the test tone sounds the
same from each speaker.
balance using the Level
Settings menu so that the level
of the test tone sounds the
same from each speaker.
For details on the Level Settings menu,
see page 60.
see page 60.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–.
• The adjusted value is shown on the display
during adjustment.
10
Press
V/v repeatedly to select
“TEST TONE,” then press
.
11
Press
v to select “OFF,” then
press .
The test tone turns off.
12
Press ON SCREEN.
The menu setting display disappears.
2,
12
12
1
5-11
3
4