Sony DH730 用户手册

D:\NORM'S JOB\SONY HA\SO0190\STR-DH730_DH830_PMRF 
01\4408151112_GB\GB04GET_STR-DH730-CEL.fm

STR-DH830/STR-DH730

4-408-151-11(2)

V/v repeatedly to select 

• Retry: Performs the Auto Calibration 

again.

• Save: Save the measurement results and 

exits the setting process.

• Warning: Displays warning related to 

the measurement results. See “Message 
list after Auto Calibration 
measurement” (page 37).

• Exit: Exits the setting process without 

saving the measurement results.

Select “Save” in step 7.  

You can select the calibration type you want by 
using the “Custom” Auto Calibration 

 

If you reposition your speaker, we recommend that 
you perform Auto Calibration again to enjoy the 
surround sound.

• You can change the unit of distance in “Distance 

Unit” in the Speaker Settings menu (page 65).

• The size of a speaker (“Large”/“Small”) is 

determined by the low frequency characteristics. 
The measurement results may vary, depending on 
the position of the optimizer microphone and 
speakers, and the shape of the room. It is 
recommended that you apply the measurement 
results. However, you can change those settings in 
the Speaker Settings menu. Save the measurement 
results first, then try to change the settings.

The Auto Calibration function will be 
canceled when you perform the following 
during the measurement process:
– Press ?/1.
– Press the input buttons on the remote control 

or turn the INPUT SELECTOR on the 
receiver.

– Press MUTING or 

.

– Press SPEAKERS on the receiver.
– Change the volume level.
– Connect the headphones.
– Press SHIFT, then press AUTO CAL again.

To check error code or warning message 
obtained in “Performing Auto Calibration” 
(page 35), proceed with the following steps.

V/v to select “Warning” in 

step 7 in “Performing Auto 
Calibration” (page 35) then press 

If a warning message appears, check the 
message and use the receiver without change.
Or if necessary, perform Auto Calibration 
again.

Check the error and perform Auto Calibration 
again.

Press 

 to select “ENTER”.

“RETRY ?” appears on the TV screen.

Press 

B/b to select “YES”, then press 

.

Repeat step 6 to 9 in “Performing Auto 
Calibration” (page 35).