Sony STRDG910 用户手册

GB

D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB04AMP_STR-DG910-CEL.fm

STR-DG910

3-094-430-31 (1)

 

In this mode, the receiver outputs the sound 
from the front left/right speakers only. There is 
no sound from the sub woofer. 
Standard 2 channel stereo sources completely 
bypass the sound field processing and multi 
channel surround formats are downmixed to 2 
channel.

No sound is output from the sub woofer in the 2CH 
STEREO mode. To listen to 2 channel stereo 
sources using the front left/right speakers and a sub 
woofer, select “A.F.D. AUTO” (page 60).

You can switch the audio of the selected input 
to 2 channel analog input. This function 
enables you to enjoy high quality analog 
sources. 
When using this function, only the volume and 
front speaker balance can be adjusted.

You can also use the input buttons on the 
remote.

 “A. DIRECT” appears on the display.
The analog audio is output.

Press DIRECT on the receiver again.  
You can also press any sound field buttons.

• When headphones are connected, “HP DIR” 

appears on the display.

• This function is not available when DMPORT 

input is selected.

2CH

?/1

Sound field 

buttons