Profile HA1000 用户手册

PEAKER CONNECTIONS (BRIDGED)

Two and four channel amplifiers are capable of being bridged ** into a mono configuration. 
This feature allows you the flexibility of using the amplifier to drive a subwoofer or a center
channel. In this configuration the amplifier sums the right and left channel to deliver one 
channel (mono) output.

Please note: In order for the amplifier to sum left and right signal information, both left  and 
right RCA connections must be made.

**CAUTION!  In the bridged mode, the amplifier must see a 4 Ohm load or higher.

Any lower than 4 Ohms will cause internal damage to the amplifier!

4 Ohm Speaker

(Minimum)

4 Ohm Speaker

(Minimum)

4 Ohm Speaker

(Minimum)