Samson 600 产品宣传页

下载
页码 2
SERVO 600
PRODUCT SPECIFICATION SHEET
SERIES
 
DESCRIPTION
 
CATEGORY
SERVO 600
 
POWER AMPLIFIER
 
AMPLIFIERS
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The Samson Servo 600 shall be a two space, rackmount 
stereo power amplifier. It shall deliver 300 watts per channel 
at 4 Ohms or 600 watts into 8 Ohms in bridge mono mode. 
It shall have 1/4 inch balanced inputs and RCA unbalanced 
inputs. It shall be a bi-polar design and use a toroidal 
transformer. The front panel shall have volume controls and 
LED metering for each channel. The rear panel shall also 
have 5 way binding posts for the amplifier outputs.
SERVO 600 SPECIFICATIONS
Stereo both channel driven
 
8 Ohms .............................. 225 Watts x 2
 
4 Ohms .............................. 300 Watts x 2
Bridged mono
 
8 Ohms .............................. 600 Watts
Signal to Noise Ratio (20Hz-20k) ...... 104dB
Distortion (SMPTE-IM) ..................... 0.04%
Input sensitivity @8 Ohms ................ 1.24V(4dBu)
Voltage Gain .................................... 34dB
Output Circuitry Class ....................... AB
AC Power
@1/8 rated power 4 Ohms, max. ....... 1.3A
@1/3 rated power 4 Ohms, max. ....... 3.3A
@ rated power 4 Ohms, max. ............ 10A
Distortion (typical @4 Ohms)
 
20Hz-20kHz,10dB 
 
below rated power ............... 0.03%
 
IkHz,rated power ................. 0.1%
Frequency Response
@8 Ohms 1Watt, 20Hz-20kHz .......... 0/-0.5dB
Damping Factor (400Hz) ................... 350
Input Impedance ..............................  15k Ohm Unbalanced, 
30k Ohm Balanced
Input Clipping .................................. 10 Vrms(22dBu)
Cooling ...........................................  Continuously variable speed, 
fan forced air
Connectors (each channel)
 
Input .................................  RCA unbalanced and 
1/4”(6.3mm)TRS, balanced 
 
Output ...............................  5-way Binding post and 
1/4” Phone
Controls ..........................................  AC power switch, Channel 1 
and 2 volume
Indicators .......................................  Power on (blue), Protection 
(amber), Signal (green) for 
each Ch., Peak(red) for each 
Ch. Level: , -24 dB, -20 dB, 
-16 dB, -12 dB, -8 dB, -4 
dB, -2 dB, O, +2 dB and 
+4 dB (PEAK).
Protection .......................................  Short circuit, Thermal,Current 
limit,DC offset,Current inrush, 
RF protection, Turn on/Turn 
off muting
Power Requirements ......................... 115/230,240VAC,50/60Hz
Dimensions (W x H x D) ....................  19” x 3.5” x 11.7” 
(483mm x 89mm x 297mm)
Net Weight ...................................... 24 lbs (10.91 kg)
FEATURES
 
(continued)
>
  10 segment LED signal indicators for each channel 
continuously display power output levels and allow you to 
correct for overloading (clipping) conditions.
>
  Unique stable bipolar circuit design that continuously 
keeps DC output during idling at or near zero volts (thus 
keeping idle speakers at their zero point). This serves to 
minimize heat overload problems by effectively preventing 
the Servo 600 from applying power when unnecessary.
>
  Forced air cooling via two temperature-sensitive, variable 
speed fans provides reliable performance without thermal 
and overheating problems.
>
  Protection relay circuitry (with dedicated LEDs for each 
channel) that guards against overheating or faulty wiring 
conditions and also prevents “thumps” when powering on or 
off. This means that you can use the Servo Series with a 
single power strip into which a mixer or other audio devices are 
connected, without danger of damage to connected speakers.
>
  Input connectors for each channel accommodate both RCA 
or balanced 1/4-inch TRS plugs.
>
  Output connections are made via 5-way binding posts.
>
  Toroidal transformer power supply for high current and low profile.
>
  The Servo 600 can be mounted in any standard 19" rack 
(taking just two rack spaces), making it easy to integrate 
the amp into any fixed or traveling PA rig.
>
  Rugged construction (an all-steel chassis with a cool gray 
finish and a lightweight anodized aluminum heat sink) 
makes the Servo 600 eminently roadworthy.
>
  Extended three-year warranty.
437.5 mm
483 mm
88 mm
297mm
POWER