Krell Industries 309323 用户手册

Krell Industries, Inc., 45 Connair Road,Orange, CT 06477-3650  USA
TEL  203-298-4000, FAX  203-891-2028, E-MAIL  krell@krellonline.com
WEB SITE  http://www.krellonline.com

Position the preamplifier where you intend to use it in your system. 
1. Neatly arrange and organize wiring to and from the preamplifier and all compo-

nents. Separate the AC wires from any audio cables to prevent hum or other
unwanted noise from being introduced into the system.

2. Connect the outputs of your source equipment to the appropriate CAST (18),

balanced (15), single-ended (16), or tape inputs (17) on the Evolution 222.

3. Connect the main outputs (20) on the Evolution 222 to your amplifier’s inputs.
4. Connect the supplied AC power cord to the IEC power cord receptacle (26) 

of the preamplifier.

5. Plug the other end of the AC power cord into AC power. The display (3) scrolls

through 

EVOLUTION 222 SOFTWARE VERSION

, and the stand-by/power LED (7) illumi-

nates red, indicating that the Evolution 222 is in stand-by mode. When the
scrolling stops, the Evolution 222 is ready to be powered on. 

After the Evolution 222 is connected to your system and to AC power, and the front
panel display has stopped scrolling, begin operation:
1. Press the power button (1) on the front panel, or the remote control power key.

The standby/power LED turns blue. The display shows the factory default input:

S-1

, and level: 

-inf

. The Evolution 222 is now in the operational mode.

2. With the preamplifier output muted, or the volume fully attenuated, select a

source manually using the front panel input select buttons (8, 9, or 10) or the
remote input select keys. Start playing the source. Use the level control knob
(14) or the remote level keys to set the volume to a comfortable level.

3. To return the preamplifier to the stand-by mode, press the power button (1) or

remote power key. (We recommend leaving the Evolution 222 in the stand-by
mode when it is not playing music.)

The balance function allows adjustment of the left and right balance. The options
are: 

CENTER, L .5-5 dB <, R .5-5 dB >.

1. Press the preamplifier menu button (5), then use the level control knob, or the

remote control up and down keys to select: 

BALANCE.

2. Press the enter button (6) or remote enter key. The display shows the default

mode: 

CENTER.

3. Use the level control knob, or the up and down keys, to select the desired bal-

ance option from 0 to +5 dB in .5 dB increments, left or right.

4. Press the enter button or key to confirm the selection. The display reads:

BALANCE.

5. Press the menu button to exit the menu.

4 Krell Evolution 222

MODEL

SERIAL NUMBER

P/N 309323
v 07.0